0
0

Iš viso:€ 0.00

Žiūrėti krepšelįPatikra
LoginRegister
0

Iš viso:€ 0.00

Žiūrėti krepšelįPatikra
LoginRegister

„JessEm“ MEDIENOS SABRO ŽYMĖJIMO MATUOKLIS (08801)

Brand:JessEm

3.9/5

€
167.83

Žymėjimo matuokliai buvo naudojami šimtmečius, tačiau iki šiol niekas nebuvo sukurta taip, kad būtų galima surinkti tikslius išmatavimus. Pristatome naują JessEm medienos kardo žymėjimo matuoklį. „JessEm“ dar kartą panaudojo pagrindinį įrankį ir padarė jį naujovišku, leisdama žymėjimo matuoklį iš anksto nustatyti į bet kurią iš anksto nustatytą padėtį. Mechaniškai pagamintas iš aukštos kokybės nerūdijančio plieno ir anoduoto aliuminio, Wood Sabre konstrukcija leidžia tolygiai slėgti ir valdyti nuo 0 iki 6. Nuožulnus peilis pagamintas iš A2 įrankinio plieno, grūdinto iki 60 RC ir atsitraukia žemiau atskaitos paviršiaus, kai nėra. naudoti. Didelis nerūdijančio plieno atskaitos paviršius yra šiek tiek mažesnis nei 3 pločio ir yra 3/4 žemiau ašmenų, todėl galite lengvai slysti. Šio gaminio naujovė atsirado dėl puikaus mikroreguliatoriaus. Pagrindinis velenas yra išgraviruotas lazeriu kas 1/2 ir per pagrindinio veleno fiksatorius galite greitai pakeisti nustatymus 1/2 žingsniais. Tikslus reguliavimas yra 1/16 colio per apsisukimą, o graduota apykaklė leidžia reguliuoti iki 1/256 colio. Svetainės langas, esantis matuoklio priekyje, yra nurodytas 1/16 colio ir leidžia sužinoti savo ašmenų nustatymą. Kai turėsite norimą padėtį, tiesiog užfiksuokite nerūdijančio plieno rankenėlę ir pradėkite darbą. Rašant eilutes įduboms, Wood Sabre galima greitai iš naujo pritaikyti antrą eilutę. Prieš išsiunčiant „JessEm Wood Sabre“, ašmenys yra šlifuojami ir sukalibruojami tikslumui mūsų Kanados gamykloje.

Nėra vienetų

EAN: 0642078416668

Kategorijos Įrankiai ir namų apyvokos reikmenys, Matavimų ir maketavimo įrankiai, Žymėjimo įrankiai,

Pagaminta Kanadoje. Aukštos kokybės gaminys. Galimas mikro reguliavimas. Galimybė iš anksto nustatyti padėtį į iš anksto nustatytą padėtį. Medienos apdirbimo žymėjimo matuoklis.
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎Canada
Customer Reviews 4.8 4.8 out of 5 stars 36 ratings 4.8 out of 5 stars
Included Components ‎Marking Gauge
Is Discontinued By Manufacturer ‎No
Item model number ‎08801
Item Package Quantity ‎1
Item Weight ‎0.01 ounces
Manufacturer ‎Jessem Tools inc.
Part Number ‎07305
Power Source ‎Hand Powered
Product Dimensions ‎14 x 3 x 2 inches

3.9

9 Review
5 Star
80
4 Star
20
3 Star
0
2 Star
0
1 Star
0

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: Mostly Dood Stuff
This is a company that seems to be incapable of missing, or putting out a dud
As with Everything that rolls through the shipping center of JessEms factory and then on out & into the world, this is top quality and rich with innovative features. However, there in lies MY issue. For me, when I pick up a marketing gauge, I want it to mark nice, Deep, CLEAR Lines, & NO MORE. This tool has a heft to it you learn to appreciate with hand tools, as well as a look that can only be described as beautiful. Yet, I find myself reaching past these to a cheap brass marking gauge that does nothing but mark nice deep straight lines. Love the quality, just not a fan of over complicating tools that were intended to be simple
Scritto da: Mikhail
The best on the market.
I have Veritas dual wheel marking gauge for marking mortices and needed additional one - long with micro adjuster for more generic usage. I was considering only those made in USA or Canada (I do not want to buy products coming from the East frequently with stolen ideas and technologies). My options were: 1). Tite-Mark by Glen-Drake Toolworks, also sold by Lie-Nielsen. $139.00 2). Veritas Micro-Adjust Wheel Marking Gauge sold by Lee Valley $58.50 3). Jessem Wood Sabre $105.00 The first two are very nice products but I decided on Jessem and do not regret because: - Does not require a secondary measuring tool (calipers) to setup the depth. It is very quick to setup depth with an astonishing precision of 1/256" using graduated micro adjuster. I checked it with my digital calipers and it was dead on. - Does not roll off the workbench. - Has a wider reference surface against the work piece. - Heavy and comfortable in the hand. - Long rod allowing a bigger range of markings. - The tightening screw firmly holds the rod and does not allow the rod to slip during marking the line. - Quality materials and workmanship and came perfectly adjusted from the factory. - It is reasonably priced for high quality product made in North America considering a number of parts used and factory calibration of the micro adjuster.
Scritto da: Discerning Buyer
Good But Not Perfect
Pros: Extremely accurate. Well machined etc. Innovative design allows for quick and precise marking. Cons: Too big and unwieldy. It is much bigger and heavier than a conventional marking gauge. I would prefer a gauge that is 30% smaller. It is closer to a panel gauge in size.
Scritto da: Erik
A dream to use.
This is the best wheel-style marking gauge I have ever used. I have been looking at the Wood Sabre for a while and have hesitated buying it because the cost was so high compared to other wheel marking gauges. I decided to go ahead and get it after misplacing my cheap Woodriver and haven't looked back since. This makes marking dovetails a breeze and you can be absolutely sure of this instrument's accuracy. It is well made and the fit and finish is phenomenal. The half inch detents have a satisfying "click" and the screw adjustment can be fine tuned to 1/256". I'm not sure I'll really need this level of accuracy but it's nice to know that it's there if I can get my woodworking skills there. The cutter is replaceable like most other marking gauges of this type and can be purchased from Jessem directly. I'm not sure if other brand's cutters will fit this one but I imagine not. The only real drawback is that the shear size and weight of it may take some practice to get used to and it can make your apron pockets sag. That being said, this marking gauge is a dream to use. Now, if they made a dual marking gauge I'd be getting that one too.
Scritto da: Me
A+ marking gauge
This has become my go-to marking gauge and it's finding more uses than I initially imagined. For example, I need to scribe a line from a 3/32" from an inside line. Rather than measure from the board edge to the line then figure out the offset from the edge to get the desired 3/32" offset from the inside line, I align the blade to the inside line and use the caliper dial to offset it 3/32". Easy peasy. Sometimes, I've also used this as an impromptu depth gauge or since there's a scale, to take quick measurements from an edge to an inside feature, shhh, don't tell the Jessem folks. What sets this unit head and shoulders above the other marking gauges is the ability to dial in the desired position from zero to six inches and almost anything in between. There's detentes every half-inch and the micrometer unit can be used to adjust to locations in between. Solidly built and very well made. Can be manually re-calibrated (for zero) if you ever feel you need to tweak it. My only beef was that the unit had some sticky residue on the reference face, maybe something left over from the machining. Not enough to take off a star as it cleaned up easily with isopropyl alcohol (the Jessem tool gauge I bought also had the same sticky residue).
Scritto da: Andrew
Luxury purchase item
I’ve long viewed this product and own many JessEm products so I new it’s quality level would surpass my expectations. Although it performs much the same thing as a less expensive choice it does it with style and a higher level of confidence. I’m super excited to use this tool for layout on my projects.
Scritto da: Randy W.
IF YOU NEED PRECISION, YOU NEED THIS TOOL!
This tool is so well made and such an incredible addition to my woodshop! Yes it is a bit in the spendy side, but the precision this tool delivers is second to none! If you need precision, you NEED this tool. You will not be disappointed at all!!
Scritto da: David Clawson
Very precise marking tool
This marking gauge is a high quality tool. Marking projects can be done very accuratly.
Scritto da: Antoine D.
Very well made.
High quality product.

Susiję produktai

hot
Crescent Lufkin 100' aliuminio kreidos ritė - CLA100A
2.6/5

€ 31.71

Crescent Lufkin 100' aliuminio kreidos ritė - CLA100A
2.6/5

€ 31.71

hot
HHIP 7600-0044 Volframo antgalio raištelis su spaustuku
3.3/5

€ 23.65

HHIP 7600-0044 Volframo antgalio raištelis su spaustuku
3.3/5

€ 23.65

hot
IRWIN STRAIT-LINE žymėjimo kreida, nuolatinis dažymas, tamsiai raudona, 4 svarai (4935525) Crimson Red 1 Count (1 pakuotė)
3.7/5

€ 71.57

IRWIN STRAIT-LINE žymėjimo kreida, nuolatinis dažymas, tamsiai raudona, 4 svarai (4935525) Crimson Red 1 Count (1 pakuotė)
3.7/5

€ 71.57

hot
Moody Tools 51-1517 Reversable Carbide Point Pants Pocket Type Scriber
3.8/5

€ 38.61

Moody Tools 51-1517 Reversable Carbide Point Pants Pocket Type Scriber
3.8/5

€ 38.61

hot
IRWIN įrankiai STRAIT-LINE 65104 standartinė žymėjimo kreida, 5 svarų, balta (65104)
3.4/5

€ 53.78

IRWIN įrankiai STRAIT-LINE 65104 standartinė žymėjimo kreida, 5 svarų, balta (65104)
3.4/5

€ 53.78

hot
Keson K3X4B 3x1 atsukamas kreidos linijos ritės derinys su 4 uncijomis mėlynos kreidos, 100 pėdų
3/5

€ 46.78

Keson K3X4B 3x1 atsukamas kreidos linijos ritės derinys su 4 uncijomis mėlynos kreidos, 100 pėdų
3/5

€ 46.78

hot
IRWIN įrankiai STRAIT-LINE standartinė žymėjimo kreida, mėlyna, 4 uncijos (64801ZR)
3.3/5

€ 22.57

IRWIN įrankiai STRAIT-LINE standartinė žymėjimo kreida, mėlyna, 4 uncijos (64801ZR)
3.3/5

€ 22.57

hot
IRWIN įrankiai STRAIT-LINE 64901 standartinė žymėjimo kreida, 8 uncijos, mėlyna (64901)
3.4/5

€ 22.84

IRWIN įrankiai STRAIT-LINE 64901 standartinė žymėjimo kreida, 8 uncijos, mėlyna (64901)
3.4/5

€ 22.84

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array

Iš viso:€ 0.00

Žiūrėti krepšelįPatikra

Kategorijos

Visos kategorijos
Meniu Kategorijos Netoliese Krepšelis

Menu