0
0

Iš viso:€ 0.00

Žiūrėti krepšelįPatikra
LoginRegister
0

Iš viso:€ 0.00

Žiūrėti krepšelįPatikra
LoginRegister

„SharkBite“ 1/2 colio MNPT adapteris, žalvarinė santechnikos jungtis, PEX vamzdis, varis, CPVC, PE-RT, HDPE, U120LFA 1/2 colio.

Brand:SharkBite

3.7/5

€
28.69

GAMINIO APRAŠYMAS Supaprastinkite savo vandentiekio poreikius naudodami SharkBite Push to Connect MNPT vyrišką adapterį. „SharkBite“ jungiamosios detalės, sudarytos iš patvaraus bešvinio žalvario ir pasižyminčios viso srauto konstrukcija, užtikrinančia maksimalią vandens išeigą, gali būti naudojamos su bet kokiu varinių, PEX, CPVC arba PE-RT vamzdžių deriniu. greitas montavimas. Nereikia jokių užspaudimų, klijų, litavimo ar įrankių, tiesiog įkiškite vamzdį, o nerūdijančio plieno dantys sukanda ir tvirtai suima, o specialios sudėties O žiedas suspaudžiamas, kad sukurtų tobulą sandarumą. MNPT adapterį galima lengvai išardyti naudojant atjungimo įrankį, kad jungiamąsias detales ir vožtuvus būtų galima lengvai pakeisti ir pakartotinai panaudoti (Atjungimo įrankis nepridedamas). Surinkus MNPT armatūrą galima net pasukti, kad būtų lengviau montuoti ankštose erdvėse. Ši MNPT santechnikos armatūra yra sertifikuota pagaminta jungtis, kuri gali būti montuojama šlapiose linijose, tiek po žeme, tiek už sienos. MNPT tiesioginio prijungimo adapteris yra skirtas 200 psi ir 200 laipsnių F, jam suteikiama 25 metų garantija. IŠ GAMINTOJO SharkBite yra stumdoma jungčių sistema, kuri tikrai įsitvirtina. Tai lengviausias būdas sujungti varinius, CPVC arba PEX vamzdžius bet kokiu deriniu – be litavimo, spaustuvų, jungčių ar klijų. Tiesiog įkiškite vamzdį ir nerūdijančio plieno dantys sukanda ir tvirtai suima, o specialios sudėties sandarinimo žiedas suspaudžiamas, kad sukurtų tobulą sandarumą. Išmontavimas taip pat greitas naudojant paprastą atjungimo įrankį. Taigi armatūra ir vožtuvai gali būti lengvai keičiami ir naudojami pakartotinai. Surinkus juos netgi galima pasukti, kad būtų lengviau montuoti ankštose erdvėse. Gaukite SharkBite ir įsigykite kitą santechnikos projektą. Šios jungiamosios detalės yra be švino ir atitinka visus santechnikos reikalavimus Kalifornijoje ir Vermonte.

Suma
Į krepšelįPirkti dabar

EAN: 0697285465763

Kategorijos Įrankiai ir namų apyvokos reikmenys, Atviras vandentiekis, Vamzdžiai, vamzdžių jungiamosios detalės ir priedai, Vamzdžių jungiamosios detalės,

SERTIFIKATA: MNPT armatūra yra sertifikuota kaip pagaminta jungtis ir gali būti naudojama po žeme ir už sienos be prieigos plokščių; įvertintas 200 psi ir 200 laipsnių F. ATVARI: jungiamoji detalė yra be švino ir atspari korozijai, todėl ilgaamžiškumas ir patikimumas. SUDERINAMAS SU ankštose erdvėse: sumontavus žalvarinę jungiamąją detalę galima lengvai pasukti ant vamzdžio, kad būtų galima naudoti ankštose erdvėse. PAPRASTAS NAUDOTI: Tiesi jungtis pasižymi novatoriška „push-to-connect“ konstrukcija, leidžiančia greitai ir lengvai montuoti; nereikia jokių įrankių, litavimo, gofravimo ar klijų. ŽALVARINĖ VAMZDŽIA: Vyriška jungtis gali būti naudojama prijungti prie bet kokio vario, PEX, CPVC arba PE-RT vamzdžių derinio; gali būti naudojamas šlapioms linijoms.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Brass
Color ‎Brass
Connector Type Adapter
Connector Type ‎Adapter
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Fitting
Installation Method ‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10.75 x 4 x 6.25 inches
Item Dimensions LxWxH ‎10.75 x 4 x 6.25 inches
Item model number ‎U120LFA
Item Package Quantity ‎1
Item Weight 0.1 Pounds
Item Weight ‎0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 2
Number Of Pieces ‎2
Part Number ‎U120LFA
Product Dimensions ‎10.75 x 4 x 6.25 inches
Size 1/2 in.
Size ‎1/2 in.
Style ‎Brass Push Male Adapter
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎Lifetime

3.7

13 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: AmazoCedric
The Amazing Sharkbite 1-1/4 connector fitting
This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.
Scritto da: Wendy Chan
It works!
Easy to install and very solid connection. It serve the purpose.
Scritto da: John
Quality
Excellent product
Scritto da: Veetuch
Easy to use
Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.
Scritto da: Anonimo
Initially concerned....
Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!
Scritto da: Reality Check
This fitting really saved the day
I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.
Scritto da: Tom Holland PA
Easy
If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.
Scritto da: T Nielson
false advertising
It said it was a pack of 6, I only got 1
Scritto da: Synonymous
Working great so far
Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.
Scritto da: Mountain man.
Slips on easily and no leaks
Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.
Scritto da: Super Dave
Works great, very long delivery time
First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch
Scritto da: Debashis Dey
New age fittings
Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.
Scritto da: claude
exellent
who ever invented these should be made king

Susiję produktai

hot
Parker 169CA-4-6 suspaudimo ir išlygiavimo suspaudimo jungtis, vamzdis su vamzdžiu, kaltinis žalvaris, suspaudimas 90 laipsnių alkūnė, 1/4 ir 3/8
0.1/5

€ 24.98

Parker 169CA-4-6 suspaudimo ir išlygiavimo suspaudimo jungtis, vamzdis su vamzdžiu, kaltinis žalvaris, suspaudimas 90 laipsnių alkūnė, 1/4 ir 3/8
0.1/5

€ 24.98

hot
Highcraft G42S-585812-5 pliūpsnio mažinimo jungiamojo vamzdžio jungtis 5/8 x 1/2 O.D. Žalvario jungtys (5 vnt. pakuotėje)
0.1/5

€ 41.56

Highcraft G42S-585812-5 pliūpsnio mažinimo jungiamojo vamzdžio jungtis 5/8 x 1/2 O.D. Žalvario jungtys (5 vnt. pakuotėje)
0.1/5

€ 41.56

hot
Emberglo 458550 8 1/4 Barbriq 5 Pak
4.1/5

€ 125.18

Emberglo 458550 8 1/4 Barbriq 5 Pak
4.1/5

€ 125.18

hot
Kriauklės gaudyklė JBend 1 1/2 arba 1 1/4 1 1/2 colio
3.1/5

€ 29.53

Kriauklės gaudyklė JBend 1 1/2 arba 1 1/4 1 1/2 colio
3.1/5

€ 29.53

hot
Dormont Supr-Safe dujų prietaiso jungtis (0240763) 30-4141-48B – 5/8 colių. OD (1/2 colio ID) 3/4 colio. MIP X 3/4 colio. MIP X 48 colių. Ilgis nepadengtas 48 coliai
3.2/5

€ 43.25

Dormont Supr-Safe dujų prietaiso jungtis (0240763) 30-4141-48B – 5/8 colių. OD (1/2 colio ID) 3/4 colio. MIP X 3/4 colio. MIP X 48 colių. Ilgis nepadengtas 48 coliai
3.2/5

€ 43.25

hot
„SharkBite“ 1/4 colio (3/8 colio OD) x 1/2 colio NPSM maišytuvo jungtis, žalvarinė vandentiekio jungtis, PEX vamzdis, varis, CPVC, PE-RT, HDPE, U3525LFA 1/4 colio x 1 colio .
3.6/5

€ 31.65

„SharkBite“ 1/4 colio (3/8 colio OD) x 1/2 colio NPSM maišytuvo jungtis, žalvarinė vandentiekio jungtis, PEX vamzdis, varis, CPVC, PE-RT, HDPE, U3525LFA 1/4 colio x 1 colio .
3.6/5

€ 31.65

hot
NIBCO 5817 dangtelio stebulė – ABS DWV, 3
3.5/5

€ 44.25

NIBCO 5817 dangtelio stebulė – ABS DWV, 3
3.5/5

€ 44.25

hot
Eastman 1-1/2 colio FIP x 1-1/2 colio prakaito dielektrinė jungtis, plienas su žalvario apdaila, EZ-20509 1-1/2 FIP X 1-1/2 litavimas
3.7/5

€ 41.28

Eastman 1-1/2 colio FIP x 1-1/2 colio prakaito dielektrinė jungtis, plienas su žalvario apdaila, EZ-20509 1-1/2 FIP X 1-1/2 litavimas
3.7/5

€ 41.28

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array

Iš viso:€ 0.00

Žiūrėti krepšelįPatikra

Kategorijos

Visos kategorijos
Meniu Kategorijos Netoliese Krepšelis

Menu