„SharkBite“ 1/2 stūmimas prijungimui x 1/4 colio (3/8 colio išorinis paviršius) stūmimas, skirtas prijungti tiesus uždarymo vožtuvas, ketvirčio posūkis, PEX vamzdis, varis, CPVC, PE-RT, HDPE, 23337-0000LF

Brand:SharkBite

3.7/5

38.51

GAMINIO APRAŠYMAS Supaprastinkite savo vandentiekio projektus naudodami „SharkBite“ žalvarinį stumiamą tiesioginį stabdymo vožtuvą. Šio uždarymo vožtuvo stūmimo-jungiamasis mechanizmas leidžia valdyti ir išjungti vandens srautą į armatūrą ar prietaisus, skirtus techninei priežiūrai ir remontui. Ši žalvarinė santechnikos detalė idealiai tinka darbui ankštose vietose ir gali būti montuojama drėgnose linijose. Šiuos tiesioginio uždarymo vožtuvus lengva montuoti, jie yra suderinami su PEX, CPVC, PE-RT, SDR-9 HDPE ir variniais vamzdžiais, o montavimui nereikia jokių specialių įrankių, klijų, užspaudimo ar litavimo. Šie stumdomi suspaudimo vožtuvai turi elegantišką chromo išvaizdą ir yra tinkami komerciniam remontui ar namų tobulinimo projektams. Visi SharkBite vožtuvai, spaustukai, jungtys ir adapteriai yra pagaminti ir išbandyti JAV. IŠ GAMINTOJO „Shark Bite“ stumdomos jungiamosios detalės yra greičiausias ir lengviausias būdas sujungti varį, CPVC ir PEX bet kokiu deriniu – šlapiu ar sausu – be litavimo, spaustuvų, jungčių ar klijų. Tiesiog įkiškite vamzdį ir nerūdijančio plieno dantys sukanda ir tvirtai suima, o specialios sudėties sandarinimo žiedas suspaudžiamas, kad sukurtų tobulą sandarumą. Išmontavimas taip pat greitas naudojant paprastą atjungimo įrankį. Taigi armatūra ir vožtuvai gali būti lengvai keičiami ir naudojami pakartotinai. Surinkus juos netgi galima pasukti, kad būtų lengviau montuoti ankštose erdvėse. Jungiamosios detalės sertifikuotos iki 200 PSI ir 200°F (93°C). Dizainas sertifikuotas pagal ANSI/NSF-61 ir ASSE 1061 gaminių standartą, skirtas naudoti geriamojo vandens ir vandens šildymo vandens paskirstymui. Patvirtinta naudoti po žeme ir už sienų be prieigos plokščių

Nėra vienetų
PAGAMINTA JAV: Visi SharkBite vožtuvai, spaustukai, jungtys ir adapteriai yra pagaminti ir išbandyti JAV. Pageidaujamas profesionalas: „SharkBite“ įrankiai ir jungiamosios detalės atitinka tuos pačius aukštus komercinės ir gyvenamosios paskirties santechnikos standartus, derindami ilgaamžiškumą ir naudojimo paprastumą; aptaki chromo apdaila suteikia patrauklią išvaizdą. LENGVAS ĮDIEGTI: Šis naujoviškas uždarymo vožtuvas turi 1/2 colio spaudžiamą įvadą ir ketvirčio apsisukimo pilno angos žalvarinį rutulinį vožtuvą, užtikrinantį greitą ir lengvą valdymą; nereikia specialių įrankių, gofravimo, klijų ar litavimo; galima montuoti šlapiose linijose. Universalus: Žalvarinės stumdomos tiesios jungiamosios detalės puikiai tinka PEX, CPVC, PE-RT, SDR-9 HDPE ir variniams vamzdžiams. SHARKBITE BRASS PUSH STRAIGHT STOP: žalvariniai tiesioginiai stūmimo vožtuvai naudojami vandens srautui į armatūrą ar prietaisus, skirtus priežiūrai ir remontui, valdyti ir išjungti; idealiai tinka darbui ankštose erdvėse; nuimkite naudodami atjungimo spaustuką arba atjunkite žnyples.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Certification ‎Nsf
Color Straight
Color ‎Straight
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 133 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Copper
Exterior Finish ‎Copper
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 2.25 x 1.35 x 4.5 inches
Item Dimensions LxWxH ‎2.25 x 1.35 x 4.5 inches
Item model number ‎23337-0000LF
Item Package Quantity ‎1
Item Weight 0.01 Pounds
Item Weight ‎0.01 Pounds
Item Weight ‎0.16 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎23337-0000LF
Pattern ‎Valve
Product Dimensions ‎2.25 x 1.35 x 4.5 inches
Size 1/2 in. x 1/4 in.
Size ‎1/2 in. x 1/4 in.
Style ‎Straight
Voltage ‎120 Volts
Warranty Description ‎For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

3.7

9 Review
5 Star
76
4 Star
15
3 Star
4
2 Star
4
1 Star
1

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: T. J. Craig Jr.
What an easy installation...
We put our old refrigerator in the basement and wanted to be able to make extra ice when needed. I had a 1/2" water line right above that was capped and was able to cut the end and pop on the sharkbite fitting. NO problems, but I was careful... A straight cut, not angled... no burrs on the end of the pipe, I smoothed them off... and made sure the fitting had fully bottomed out. Definitely recommend but proper installation is critical.
Scritto da: Phillip Johnson
Don't call a plumber do it yourself
Don't have solder, flux and a mini torch? Not a plumber or trust your skills when soldering? OK, buy this instead. Reem the copper end with a knife so that there's no burr and slap this puppy on and turn your water on. Just make sure you push this on completely, that's all. As easy as it gets and holds city water pressure no problem. Worth the price so if you need this then just buy it already.
Scritto da: Dustin Pearson
Worked perfect for installing new humidifier on my furnace!
Ran the pex line over there, threw this on the end. hooked up a 1/4' stainless braided hose ('ice maker hose') and it worked perfect. I like having the shut off right there by the humidifier cause it makes maintenance just a little faster. SharkBite fittings work excellent and I have yet to see one fail.
Scritto da: Karen Kent
Very easy to turn and the quick connect hardware was included
Very easy to turn and the quick connect hardware was included. It only took a few spanner turns to seal it. While my application didn't call for such lush looks (these are meant for toilets) the chromed brass is pretty. The clip intended to hide the disassembly ring doubles as a removal tool if you turn it upside down ;3 For anyone worried about it, I removed this from the same pipe twice and it still seals just fine. This particular design should be able to be removed and reinserted a handful of times with no problems.
Scritto da: Eizu
Has Anyone Else Had One Of These Leak?
Sharkbite is a premium brand when it comes to push-on fittings, so I was surprised when I pushed this guy onto some PEX tubing and it leaked. I haven't had that problem with the other Sharkbite brand valves and pressure regulator that I bought. I monitored it for a few days, and it seemed to eventually stop leaking after I fiddled with it a few times. I don't know if it is my paranoia, but it still feels damp at that connection when I touch it. Needless to say, I am replacing this fitting with a crimp on PEX tee fitting, and a compression fitting ice maker shutoff valve. The peace of mind of knowing that our plumbing will not leak was worth the extra expense.
Scritto da: Austin Walker
or pex so they are great to have on hand
Local supply house did not carry these. I was adding a whole home humidifier to my house and the HVAC installer wanted to use a saddle valve. I purchase a sharbite T and one of these valves instead. These can be used for copper, pvc, or pex so they are great to have on hand. Have used several sharbite problems over many years and have never had one leak or any problems.
Scritto da: Machaon
Fast and easy solution for inserting a stop valve into a water line.
Sharkbite is so easy and fast to use. This stop valve makes installation easy. Just cut the pipes/tubing and insert. Really good quality and very functional. We've replaced quite a bit of our 50 year old plumbing with Sharkbite. Nice to be able to repair plumbing without welding or having to use a bunch of tools.
Scritto da: Michael
Wonderful
Great
Scritto da: Juan
Easy way to do it
Wrong size ,send back

Susiję produktai

hot

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array