AmpFlow M27-150 šlifuotas elektros variklis, 150 W, 12 V, 24 V arba 36 V nuolatinė srovė, 3800 RPM

Brand:AmpFlow

2.8/5

88.17

AmpFlow M27-150 variklis sukurtas taip, kad būtų užtikrintas geras našumas ir efektyvumas už ekonomišką kainą. Tai pasiekiama naudojant keturis šepečius ir pažangų elektromagnetinį kompiuterinį modeliavimą ir dizainą. Variklio skersmuo yra 2,7 colio, o ilgis - 3,9 colio. Velenas važiuoja dviem aukštos kokybės rutuliniais guoliais. Didelio gabarito variklio laidai yra 12 colių ilgio. Variklis sveria 3,0 svaro ir yra padengtas juodais milteliniais dažais. Šis reversinis variklis gali būti naudojamas esant nuo 12 V iki 36 V nuolatinės įtampos. Esant 24 voltams, greitis be apkrovos yra 3800 aps./min. Nominali išėjimo galia yra 150 W, esant 2800 aps./min., esant 9 amperams. Didžiausias efektyvumas yra 79%. Šis variklis tiekiamas su 11 dantų žvaigždute, skirta #25 ritininei grandinei. AmpFlow® varikliai naudojami įvairiose srityse, įskaitant robotus, elektrinius paspirtukus, elektrinius dviračius ir kitas asmeninio transporto sistemas. Daugiau pasirinkimų ieškokite „Amazon“ ieškodami „AmpFlow“ variklių.

Tiekiama su 11 dantų žvaigždute #25 grandinei. Didžiausias efektyvumas esant 24 V įtampai: 79%. Nuolatinė galia: 150 vatų (1/5 arklio galių). Apsukai be apkrovos: 3800 esant 24 voltams; Galima naudoti esant nuo 12V iki 36VDC įtampai. Matuoja 2,7 colio skersmens (68 mm) ir 3,9 colio ilgio (99 mm).
Brand AmpFlow
Country of Origin USA
Horsepower 150 Watts
Item model number M27-150
Item Weight 3 Pounds
Manufacturer AmpFlow
Package Dimensions 6.6 x 4.4 x 4.4 inches; 3 Pounds
Speed 3800 RPM
Voltage 24 Volts, 12 Volts

2.8

5 Review
5 Star
48
4 Star
11
3 Star
11
2 Star
30
1 Star
0

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: Lorenzo Gonzalez
Good motor if you know what you need.
I work this thing pretty hard, driven by a Dimension Engineering "Sabertooth" motor controller. It whips a moving target system back and forth across 60 feet of cable very nicely and rapidly indeed, especially at 24V. I fashioned a very simple mount by drilling and milling a 4"-long piece of 1-1/2" x 1/8" L-angle aluminum (available at any good hardware store in 36" lengths and easy to cut with hacksaw, cordless drill, dremel, if you don't have a mill). Only two of the faceplate screws (#8 machine screws, if I recall correctly) go into the mount, but it's plenty.
Scritto da: chinatwanger
This could all be easily eliminated if they just turned a step in the ...
A cheap motor for cheap. So OK.Be careful taking off the sprocket... The threads on the motor shaft are LEFT-Handed (as they should be). So if you over tighten the shaft nut it will force the shaft bearing (inside the motor) down onto the armature coil. Then to get the motor to work again you'll have to try and pull that bearing off the coils and back into position. This could all be easily eliminated if they just turned a step in the shaft instead of using a collar under the sprocket. That would keep this from happening. But the motor works and was cheap so I can live with it.
Scritto da: Linhking
It's working well, but not very good.
I use it for my project handle a windmill turbine, it got hot to much after 30', I don't know how long it's alive if hot to much. with #25 chain not fit for normal teeth pulley, so take a lot of personal technical to make it working the way I need.
Scritto da: Zaen Q.
exactly what i expected
amazing generator, fairly free moving. Will definitely look to purchase the 300W dc motor soon.
Scritto da: jose
Five Stars
Ver y good

Susiję produktai

hot
A. O. Smithas SK1152
0.1/5

€ 727.03

A. O. Smithas SK1152
0.1/5

€ 727.03

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array