CURT 19101 kemperio kablys 2 x 4 colių RV buferiui, 2 colių imtuvas, 3 500 svarų

Name: CURT 19101 kemperio kablys 2 x 4 colių RV buferiui, 2 colių imtuvas, 3 500 svarų
Brand: CURT
SKU: 0612314009947
Price: 165.82 EUR
Availability: InStock

Brand:CURT

3.4/5

€
165.82

CURT RV kablys yra priekabos kablys, skirtas montuoti ant pramoginės transporto priemonės galo, kad būtų papildomos vietos kroviniams. Šie kabliai gaminami naudojant CURT kokybiškus roboto suvirinimo, kruopštaus valymo ir tikslios apdailos procesus. Mūsų RV buferio kabliai yra padengti skystu A sluoksniu, po kurio dengiamas blizgus juodas miltelinis sluoksnis, užtikrinantis atsparumą dilimui ir korozijai, ir juose yra 2 x 2 imtuvo vamzdžio anga. Šis ypatingas buferio kablys turi 3500 svarų bendrosios priekabos svorio. ir 350 svarų liežuvio svorio, todėl tai puikus pasirinkimas vilkti dviračių laikiklį, krovinių laikiklį, valties priekabą ar mažą komunalinių paslaugų priekabą už jūsų RV. Jis taip pat gali būti naudojamas vilkti pramoginės transporto priemonės priekabą, todėl galite pasiimti su savimi keturratį, asmeninį vandens motociklą, purvo dviratį ar bet kokius žaislus, kuriuos norite turėti su savimi. Prieš vilkdami visada patikrinkite bendrąjį priekabos svorį ir buferio svorį. CURT RV kabliai nėra tik dar vienas jūsų kemperio priedas; jie yra sumanios inžinerijos ir kokybiškos konstrukcijos gaminys, padėsiantis kiekvieną kartą išvažiavus į kelią pasiekti geriausią RV patirtį.

Suma

Į krepšelį Pirkti dabar

EAN: 0612314009947

Kategorijos Automobiliai, Eksterjero priedai, Vežimo priemonės ir gervės, Sukabinimo įtaisai, Priimtuvai,

LENGVAS ĮDIEGTI. Šio RV kemperio priekabos kablys montavimas yra greitas ir paprastas. Jis patikimai pritvirtinamas prie beveik bet kurio 2 colių x 4 colių RV buferio su pridedama 8 klasės technine įranga ir paprastai tik keliais įrankiais. RŪDŽIAI, LŪDŲ, ATSPARUS UV spinduliams. Šis kemperio buferio kablys yra apsaugotas dvigubu rūdims atspariu A sluoksniu ir labai patvariu juodu milteliniu sluoksniu. Apdaila yra kietinama, kad būtų išskirtinis atsparumas rūdims, drožlėms ir UV spinduliams. PILNAI IŠBANDYTA. Kiekvienas CURT kemperio kablio dizainas yra išbandytas mūsų Detroito inžinerijos įstaigoje pagal SAE J684 standartus, kad būtų užtikrintas didžiausias saugumas ir patikimumas vilkimo metu. ĮVAIRUS DIZAINAS. Šis RV priekabos prikabintuvas aprūpina jūsų kemperį standartiniu 2 colių x 2 colių prikabinimo imtuvu, suteikiančiu daug įvairių vilkimo galimybių. Jis gali priimti rutulinį laikiklį, krovinių laikiklį, dviračio laikiklį, vilkimo kablį ir daug daugiau. PATIKIMA JĖGA. Šis RV priekabos kablys yra įvertintas 3500 svarų. bendrasis priekabos svoris ir 350 svarų. liežuvio svoris (apribotas iki žemiausio vardinio vilkimo komponento).

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.3 4.3 out of 5 stars 231 ratings 4.3 out of 5 stars
Exterior	‎GLOSS BLACK POWDER COAT
Finish Type	GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer	‎No
Item model number	‎19101
Item Weight	‎12.62 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎19101
Material	Carbon Steel
Model	‎RV Bumper Hitch
OEM Part Number	‎19101
Product Dimensions	‎11 x 9 x 6 inches
Vehicle Service Type	Marine-Personal-Craft, Off-Road-Motorcycles, ATV, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Matt Rosario

Didn't fit my bumper, believe the part was defective

Did not fit my bumper. I believe it was defective (poor quality control). There were weld beads that ran to the inside of the mount that sat against the bumper that prevented the bolts to align with the holes. The product seemed sturdy and able to hold a good amount of weight, if only I could have used it. I sent the item back for a refund with zero issues.

Scritto da: Doug

Very Nice for Camper hitch

We bought this and attached it to the Y frame on the front of the camper. We use it to store our weight distribution hitch so that is does sit in the truck. We lock it in and it is out of the way.

Scritto da: Amazon Customer

Cut to Fit

This is an update to my original review. I originally returned the Curt camper hitch in the hope of finding something that fits better. Failed in that goal and rebought the item. Had to seriously modify the hitch to fit it on my aluminum camper trailer. (I only need it to store my truck's bed extender.) Using a angle grinder to cut the hitch down to fit was actually the easy part. Drilling new holes in the very thick steel was non-trivial. Think it will be fine.

Scritto da: Richard Lindley

Saved me big bucks!!!

If you are mechanically inclined this will work on a Highlander bumper. Drilled the aluminum bumper slipped this right in place trimmed the bumper cover been hauling trailers ever since. You don't need a converter switch installed under your dash either or a fuse in your fuse box. Your lights will go onto a line that will always have power as long as the switch is on. Find your signals and your break. That's it you will always have daytime running lights but saves you the time and money for the converter that will pulse your lights. This is because most vehicles don't have a separate signal light like the highlander. Most vehicles pulse the taillight for the signal already.

Scritto da: aric kane varner

Great Receiver for Trailer!

I took and cut this down and re-drilled the top holes to fit the 2"x3" rear cross rail at the back of my boat trailer. Added a pigtail to the back of the boat trailer to plug the ski trailer into for the lights. Now I can pull my jet ski behind my boat like a champ! I ran that boat/ski trailer combo all summer long at 80 mph! No problems whatsoever! Heavy duty construction! Nice black finish! Well built product! Very pleased!

Scritto da: josh warren

Fits a Boss plow crossmember on a 2015-2019 GM HD pickup!

After I had my plow installed I wasn't thrilled about losing my front receiver. I measured the plow crossmember and guessed that this would fit, and I guessed right.

Scritto da: RickieDean

Just what i needed

I installed this hitch on the back of my Toy Hauler Travel Trailer to carry our Bicycles,the Curtis hitch is very well maid, easy to install and allows me to use my hitch bike rack,Love it.

Scritto da: Poolplayer

Description is Misleading - 4"x2" bumper

I wanted to leave this information so others won't be as confused about this product as I was. I was very hesitant to order this as I was looking for a camper bumper hitch to be used for a bike rack. My camper bumper is 4" high by 2" deep. Most rv bumper hitches are for a 4"x4" bumper and this one (Curt 19101) on Amazon and most other web sites that sell this, specify it will fit a 2" square channel bumper. This description in wrong as it fits and is made for my 4"x2" bumper!!!!! Chalet Arrowhead Very solid product and as always, Amazon Prime shipping was fast, showed up next day!

Scritto da: ken

Quality

Great quality and easy to install.

Scritto da: Ryan K.

Great hitch

Bought for a bike rack on my 2x4 C channel bumper on my camper trailer. Very heavy duty hitch... Way more than I needed. Had to do some minor modification to my bumper for it to bolt on properly. For the price, it wasn't worth sending back and only cost a few bucks to do the modifications to make it fit. Great product.

Scritto da: Mike M

Great addition to our trailer for carrying accessories

Works great to add a bike rack to our pop up trailer

Scritto da: Dave Pringle

Worked for me, a cheap alternative

I bought this hitch for a 2014 Mitsubishi Mirage, not to use to pull anything but as a means of being able to mount a 'load extender' type of thing onto the hitch and thereby help carry kayaks and canoes. I'm sure it will also come in handy on trips to the lumber store etc. The problem everyone who will have done this knows, is that mounting a kayak or canoe to a roof rack requires a person to twist their back around in a way that can cause a problem, especially when you get to my age. With an extender, one can tip up the front of the canoe/kayak onto the bar and then slide it forward onto the vehicle. I have not as yet tried this but am looking forward to using this new system!

Scritto da: maryse

Very solid !

I found this piece to be excellent and well made. It didn't suit us for what we needed it for but I definately recommend it if you have the right size bumper.