CURT 31076 2 colių priekinis imtuvo kablys, Select Toyota 4Runner, Blizgus juodas miltelinis dangtelis

Name: CURT 31076 2 colių priekinis imtuvo kablys, Select Toyota 4Runner, Blizgus juodas miltelinis dangtelis
Brand: CURT
SKU: 0612314036639
Price: 648.56 EUR
Availability: InStock

Brand:CURT

3.7/5

€
648.56

LENGVAS MONTAVIMAS. Šis priekinis vilkties kablys sukurtas specialiai transporto priemonei, kad tiktų tam tikriems Toyota 4Runner modeliams. ATSPARUS KOROZIJAI. Siekiant užtikrinti puikią apsaugą nuo rūdžių, įbrėžimų ir UV spindulių pažeidimų, šis priekinis kablys yra padengtas dviejų sluoksnių rūdijimui atspariu A sluoksniu, kuris padengia kablį viduje ir išorėje, ir itin patvariu juodu milteliniu sluoksniu. IŠBANDYTA KONSTRUKCIJA. Šis priekinio tvirtinimo kablys yra visiškai patikrintas dėl jūsų saugumo mūsų Detroito inžinerijos įstaigoje. Mes išbandome savo priekinės priekabos kablių konstrukcijas pagal SAE J684 specifikacijas. PATIKIMA JĖGA. Šis priekinis kablys yra įvertintas 3500 svarų. GTW ir 350 svarų. liežuvio svoris. Jis taip pat įvertintas 9000 svarų. Tiesios linijos traukos galia, skirta vilkimui ir gervei (apribota iki žemiausio vardinio vilkimo komponento). Universalus imtuvas. Pridėkite naudingą prikabinimo imtuvą prie savo transporto priemonės priekio su šiuo priekyje montuojamu imtuvo kabliu. Standartinis 2 colių imtuvas leidžia pritvirtinti sniego valytuvą, krovinių laikiklį, dviračio laikiklį, vilkimo kablį, gervės laikiklį ar kitą vilkimo priedą.

Suma

Į krepšelį Pirkti dabar

EAN: 0612314036639

Kategorijos Automobiliai, Eksterjero priedai, Vežimo priemonės ir gervės, Sukabinimo įtaisai, Priimtuvai,

Brand	CURT
Finish Type	GLOSS BLACK POWDER COAT
Item Weight	36.85 Pounds
Material	Carbon Steel
Vehicle Service Type	Marine-Personal-Craft, Van, Sport-Utility-Vehicles, Truck, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Mike

30 minute install. Easier than an NAU liBeral arts major. ????

I installed it by myself in 30 minutes, using a half inch ratchet and three different sockets. One note, I had to bend both end tabs out about 1/4” with a steel mallet to fit the width of the frame, but that was also easy… max one minute of effort… also like an NAU grad ????

Scritto da: Houshang

It Is really good!!

PERFECT FIT to my 2021 4Runner SR5!! Great quality!!

Scritto da: Eric

Easy Installation

The installation was pretty straight forward. You’ll need a torque wrench that goes up to 210 ft/lbs. I had to slightly bend the outer tabs with a 5lb sledge to get the bolt holes to line up correctly.

Scritto da: JTD

Works great1

Kudos to the engineers and techs at Toyota and Curt. Hitch fit perfectly. I installed it by myself, took a little while longer to raise and adjust but everything slid into place.

Scritto da: R. Wilson

Excellent fit on a 2014 Toyota 4runner Trail

The hitch was fairly easy to install on the vehicle except the mounting hardware was not included in the box nor were the instructions. I found the instructions on the Curt web site and they were easy to follow. The shipping box did not have any packing, instructions, or the mounting hardware that the instructions said should have been in the box. I purchased my own grade 8 bolts and fabricated a 3/8 inch steel plate to fit over the truck tow hook.

Scritto da: lou

Very tight fit but works perfectly on my 2016 4Runner

The front hitch mount fits my 2016 4 Runner perfectly and is less obtrusive than I expected. You have to be patient to get the device to go into place and align with the mounting holes. It is an extremely tight squeeze on the 4Runner. Unless you are able to work with the vehicle on a lift, don't even try to do it without someone to hold the opposite end. Even with a lift, it will be difficult to do it without help.

Scritto da: Alfonso E. Aguilar

Great product!

Easy to install and all the hardware was there!

Scritto da: Moral_Threat

If you need one, this is it!

Well engineered and strong. Not too bad to install either, took around 45 minutes. If you need a front receiver, get this one. Doesn't impact approach angles much, if at all.