DELTA maišytuvas RP3614, mažas, daugiaspalvis

Brand:DELTA FAUCET

3.6/5

33.90

PRODUKTO APRAŠYMAS Mūsų maišytuvams ir jų dalims suteikiama garantija visam gyvenimui, tačiau tam atvejui, jei norėtumėte patys atlikti remontą, mes siūlome kai kurias dalis, kurias galite užsisakyti. Šis remonto rinkinys tinka daugeliui Delta vienos ir dviejų rankenų maišytuvų. IŠ GAMINTOJO Delta maišytuvo RP3614 Delta® maišytuvo remonto rinkinys

Nėra vienetų

EAN: 0034449036146

Kategorijos Įrankiai ir namų apyvokos reikmenys,

Karštas. Pakeičia komplektą Nr.1. Sudėtyje yra: 2-O žiedai, 1-Nr. 61 kumštelio mazgas, 2 Nr. RP4993 sėdynės ir 2 Nr. 1974 veržliaraktis. Šis produktas pagamintas Kinijoje. Šis produktas prideda didelę vertę. RP3614 vienos svirties rankenos maišytuvo remonto rinkinys.
Batteries Included? ‎No
Batteries Required? ‎No
Brand DELTA FAUCET
Brand ‎DELTA FAUCET
Color Multicolor
Color ‎Multicolor
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 425 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎No Finish
Finish Type ‎No Finish
Handle Type Lever
Handle Type ‎Lever
Included Components ‎Product Only
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎Yes
Item model number ‎RP3614
Item Package Quantity ‎1
Item Weight ‎0.09 Pounds
Item Weight ‎1.5 ounces
Manufacturer ‎Delta Faucet
Material Rubber, Plastic
Material ‎Rubber, Plastic
Measurement System ‎Metric
National Stock Number ‎4510-01-259-2610
Number of Handles ‎2
Number of Items ‎1
Package Type ‎Standard Packaging
Part Number ‎RP3614
Product Dimensions 4"L x 4"W
Product Dimensions ‎4"L x 4"W
Size ‎Small
Unit Count ‎1.0 Count
Usage ‎Inside
Voltage ‎1 Volts
Warranty Description ‎Limited Lifetime
Water Consumption ‎1 Gallons

3.6

8 Review
5 Star
76
4 Star
14
3 Star
6
2 Star
1
1 Star
3

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: Mikerick
The one piece ball seal save time and stress.
I bought this to stop the tub drip. I also bought the danko brand with the 2 piece ball seal. It's hard to put the cap on while trying to keep the off brand 2 piece ball seal in place. This is the difference between success and sweating on your knees fighting with chunks of hard water. You might have to reuse the long cup seal springs but that's okay.
Scritto da: Rob
Call Delta Cust Serv to identify and recommend correct parts
Even after replacing the little seals, our faucet still leaked sometimes out of the handle area when turned on. This kit (RP3614) worked on our Delta 600 series tub faucet. Do yourself a favor and Call Delta Cust Serv (1-800-345-3358) as others have recommended. They will help you identify what faucet you have and which parts to order. They recommended to replace the ball (RP212) and nut (RP1050) as well, since some of the parts have been updated and work in conjunction with other updated parts. (Got rid of the design with the little white ring that adjusts with a little wrench that comes in the kit, don't need it with the updated cover nut. Also replaced the plastic ball with the metal ball type.) BTW, the RP3614 kit comes with a bunch of stuff I didn't need, since it is apparently also used for some kitchen faucet types. I only used the plastic ball retainer with the slot and the little seals and springs. There are so many models, I found it confusing and spent a lot of time trying to figure it out myself. Maybe this will save you some time.
Scritto da: Gail C. Cobb
The o-rings included do NOT fit some older single-handle kitchen faucets
Everything was as expected from Delta except the o-rings, which were not the correct size for my faucet. I was able to find the right size parts from another vendor.
Scritto da: Auton
Fit perfect, fixed my dripping faucet.
Our 2007 model 175 Delta Faucet has been dripping from the faucet outlet for a while now. This kit was pretty easy to install and fixed the drip. The only issue I had was that the included tool was a little too small to get get enough torque to break free the Allen screw that holds the handle on. I had to use a larger L shaped Allen key to remove that screw, but once that was loose it was smooth sailing. There were a few parts in the kit that I did not need, I only used the springs, the small round seals, and the large grey seal with the triangular opening. I also replaced the ball valve. With both parts the faucet is smooth, easy and like brand new.
Scritto da: james
Stopped leaking when faucet was on
The faucet leaked up under the handle when it was on, not when off. Replacing the seats and springs solved the problem and it now works as smooth as new. Didn't need the O-rings at this time.
Scritto da: B. Ziems
A reasonably easy to install and inexpensive solution for a leaky kitchen faucet
I installed a new water filter on the end of my faucet spigot. The increased resistance led to a leak around the base of my approximately 9 year old Delta kitchen fixture. This repair kit was inexpensive and contained all the parts that I needed to stop the leak. Delta provides more parts than you need in this kit for repair of my fixture, so my assumption is that this kit covers the repair of a number of models. The installation is simple, but if you have tap water with a lot of minerals, like I do, you will need patience. I used some paper towels soaked with vinegar to break down some of the mineral deposits that had built up around the the allen screw on the handle as well as on the faucet retaining nut. Also it can be a little difficult to remove the old large center post oring, again take your time and try not to gouge the fixture as this could prevent the new oring from sealing properly. All in all replacing the seals on this Delta fixture was far less expensive and far less frustrating than my experience on my Kohler bathroom fixtures.
Scritto da: Dan Eakin
Worked perfectly
I used a third party faucet repair kit that supposedly worked on my Delta faucet. It didn’t work. It was recommended I get the genuine Delta faucet kit, and my leak went away.
Scritto da: SAMAS
Easy to install
Bottom line is it worked just as I wanted and the shower faucet is leak free and operates smooth as butter. I would purchase this product again. Long story is I had a shower valve that was a little tight to operate and was leaking a drop every few seconds. It had been like that for 3 years. So after internet research I figured out the parts kit and went in for the fix. The parts kit was perfect. Had all the parts and the tool to tighten the packing nut down. Easy to install. I’ll update if anything changes (IE- a leak). So far after a week it’s working great.

Susiję produktai

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array