KRUMPANČIŲ RAKTUKAS 114 Vnt. SAE / metrinio reketavimo čiaupo ir matricos rinkinys – 82812 114 kompiuterių rinkinys

Name: KRUMPANČIŲ RAKTUKAS 114 Vnt. SAE / metrinio reketavimo čiaupo ir matricos rinkinys – 82812 114 kompiuterių rinkinys
Brand: GEARWRENCH
SKU: 787721817901
Price: 447.87 EUR
Availability: InStock

Brand:GEARWRENCH

3.8/5

€
447.87

PRODUKTO APRAŠYMAS Šis pilnas SAE standartinių ir metrinių GEARWRENCH čiaupų ir štampų rinkinys puikiai tinka meistrams mechanikams arba mašinų dirbtuvėms, kurioms reikia įvairių sriegimo poreikių. 48 čiaupai ir 48 štampai suteikia jums bet kokio reikiamo dydžio, o mūsų įrankiai nuo pat pradžių sukurti taip, kad mūsų sunkiai dirbantiems naudotojams pateiktų GEARWRENCH naujoves, pvz., mūsų T rankenų 5 reketuojamą galvutę arba patentuotą Twist Lock kreipiklio sistemą, kuri apsaugo ilgintuvą arba pjovimo įrankį prie rankenos, kad kiekvieno pjūvio metu susidarytų tiesūs sriegiai. AMAZON.COM Visas sriegio ir štampavimo įrankių reketinės T rankenos sistemos rinkinys (žr. didesnį). 114 dalių pavarų veržliarakčio veržliarakčio ir štampavimo rinkinys (modelis 82812) idealiai tinka naudoti ankštose, ankštose vietose ir patentuota Twist Lock Guide System. sumažina štampo kreiptuvo atbulinę eigą ir išlaiko štampus centre pjaunant sriegius. Tvirtinamasis T veržliaraktis sukuria 5 laipsnių veržliarakčio lanką, o jo apverčiama svirtis leidžia greitai perjungti iš priekio į atbulinę eigą, kad būtų išvengta sukimosi ranka. KAS YRA DĖŽELĖJE82800 didelis veržliaraktis su veržliarakčiu T, 82801 didelis fiksavimo čiaupo adapteris, 82802 didelis šešiabriaunis veržliaraktis, 3881 vidutinio veržliarakčio T veržliaraktis, 3883, vidutinio sriegimo adapteris, 3882 mažo čiaupo adapteris, 3884 vidutinis srieginis adapteris, 3884 vidutinio ilgio 8 adapteris, 8208 3 ilgio adapteris 8 prailginimo adapteris, stumdomas T adapteriams, 4 mm šešiabriaunis raktas, 5 varžtų ištraukikliai, metrinis sriegio matuoklis, SAE sriegio matuoklis, 48 srieginiai sriegiai ir 48 antgaliai APIE GEARWRENCH Išleidus originalų patentuotą 50 reketinį veržliaraktį, „GearWrench“ nuolatos pirmauja praleidžiamų terkšlių srityje. lizdai, atsuktuvai / veržlės, replės ir specialūs įrankiai. Nesvarbu, kurioje pramonės šakoje atsiduriate, „GearWrench“ turi įrankius, atitinkančius jūsų poreikius – nuo tikslių iki beveik nesunaikinamų. „GearWrench“ rankiniams įrankiams suteikiama garantija, kad juose nebūtų medžiagų ir gamybos defektų.82812 114 VIENETŲ DIDELIS DARBINIŲ TARPŲ IR ŠTARIŲ DERINIMAS APŽIŪRĖTI * Patentuota „Twist Lock“ kreiptuvo sistema sumažina štampo kreiptuvo atbulą * Automatinio užrakinimo funkcija leidžia saugiai išimti čiaupo adapterį * Apverčiama svirtis pašalina sukimąsi rankomis * Anglinio plieno konstrukcija * Visą gyvenimą trunkanti garantija IŠ GAMINTOJO Pavarų raktas 114 dalių didelis reketavimo čiaupas ir dietinis rinkinys SAE/metrinis, kurį sudaro: 82800 didelio reketavimo T veržliarakčio, 82801 didelio fiksavimo čiaupo adapterio, didelio 82802 šešiakampis štampavimo adapteris, 3881 vidutinio reketo T veržliaraktis, 3883, vidutinio sriegio adapteris, 3882 mažo sriegio adapteris, 3884 vidutinio sriegimo adapteris, 82803 vyriškas ilgintuvo adapteris, 82804 moteriškas ilgintuvo adapteris, stumdomas T adapteriams, 4 mm šešiabriaunis raktas, 5 varžtų ištraukikliai, metrinis sriegio matuoklis, SAE sriegio matuoklis, 48 sriegiai ir 48 štampai. Pilnas 48 čiaupų ir 48 štampų rinkinys, taip pat maža, vidutinė ir didelė reketuojamų T rankenų sistema, fiksuojančių čiaupų adapteriai ir šešiabriauniai štampų adapteriai. Čiaupai ir štampai pagaminti iš aukštos kokybės anglinio įrankių plieno. Krumpliaračių veržliarakčiai su reketu – I rankenos sistemos puikiai tinka meistrams mechanikams ar mašinų dirbtuvėms. Komplekte yra pūstas dėklas saugiam ir organizuotam laikymui. Žiūrėti daugiau

Nėra vienetų

EAN: 787721817901

Kategorijos Įrankiai ir namų apyvokos reikmenys, Elektriniai ir rankiniai įrankiai, Rankiniai įrankiai, Gręžtuvai ir dildės, Gręžtuvų ir štampų rinkiniai,

Disko prailginimo adapteriai suteikia didesnę prieigą prie siaurų vietų, kai naudojami su 3/8 colių disko plėtiniais. Automatinio užrakinimo funkcija leidžia saugiai nuimti čiaupų adapterius. Išpūtimo formos nešiojimo dėklas su pakreiptais čiaupų laikikliais, kad būtų lengva pasiekti ir laikyti. Rinkinį sudaro 2 reketuojančios T rankenos, 3 dydžių čiaupo adapteriai ir 2 dydžių štampo adapteris, 2 ilgintuvai ir stumdomas T. adapteriams – 4 mm šešiabriaunis raktas, 5 sraigtiniai ištraukikliai, SAE ir metriniai sriegio matuokliai bei 48 SAE ir metrinio dydžio sriegiai ir štampai nuo 4 40 iki 3/4 colių ir 3 mm iki 18 mm. Diegiklių adapteriai veikia su 3/8 colių pavaros pralaidumo reketo ir lizdų sistema bei lizdų priedais. Reketinis veržliaraktis veikia su GEARWRENCH pralaidų lizdų sistema. Sukimo užrakto kreipiklio sistema sumažina štampo kreiptuvo „atsiėjimą“ ir pjovimo metu išlaiko štampus centre. Reketuojantys T rankenos vėjo štampams su 5° siūbavimo lanku ir atbulinės eigos svirtimi, kad būtų išvengta sukimosi rankomis.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎As Shown in the Picture
Country of Origin	‎Mexico
Customer Reviews	4.7 4.7 out of 5 stars 3,959 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Full Polish Chrome; taps & die are untreated
Included Components	‎
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎82812
Item Package Quantity	‎1
Item Weight	‎1.3 pounds
Manufacturer	‎GearWrench
Material	‎Steel
Measurement System	‎SAE & Metric
Part Number	‎82812
Power Source	‎Hand Powered
Product Dimensions	‎21 x 13 x 3 inches
Shape	‎Rectangular
Size	‎114 PC
Style	‎Set
Usage	‎Professional
Warranty Description	‎No Warranty - Consumable

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: OZ4

Works Great

Works as advertised!

Scritto da: nick radakovich

Value

Where I work taps are important an the quality is a must

Scritto da: Kenn

6 years and counting

Had these for six years and use them all the time as I restore a classic beetle to chase threads and other small projects. It’s a great set. The ratcheting handles are great, it’s all of great quality. Love this set.

Scritto da: Whilly whips

Worked great

Worked great as expected!

Scritto da: Tex

A great set with a lot to offer for this home-user.

I had read the reviews here before purchasing and especially took note of the people that reported some gouges in some of the machined taps with this set. I ordered anyway for a couple of reasons. First, this is no small company. It is part of Apex Tools that owns Lufkin Tapes, Crescent Tools, Wiss cutting tools, Nicholson Files and more etc that go back over 100 years. I have all of those tool Brands at home and they have served me exceptionally well for 30-40 years. So, I figured I'd give this set a go and if it was totally unacceptable, I could always return it (thanks to Amazon's service). Bottom-line, its not going back... I'm a home/hobbyist user of Tap and Dies, but I can understand why a Professional who uses these tools in a daily business setting can feel differently about what they need. But for my use at home, this is a great set, and for what you get, a very good price. I could not touch an equally configured Irwin/Hansen set for this price point. I have also used this set and it does a very acceptable job for my needs. Regarding the reports of the small gouges in some of the larger Taps, yes I have those too. But it is only on a couple of the Taps, the gouges are small, and the gouges are not on the cutting edges of the Taps. The cutting edges are clean, in tact and sharp. The very few gouges are on the threaded following surfaces, so that problem (for me) will not affect the tool's ability to cut proper threads. I did find that I needed to clean out a few loosely attached burrs from a couple of the Taps when they were machined. A small brass brush or even the "thread gauges" that come with this set easily dispatched those burrs. I have already used some of the Taps and they cut very well. The accessories that come with this set are quite remarkable and they work well too. I especially like the Tap Adapters that come with this set and they way they lock into the T-wrenches. My only complaint about the T-wrenches is that I can't lock the ratchet into place. You either go forward or backward via the selector flip/switch. If you have done much tapping of harder metals, you know that going forward and back quite often is needed to dislodge the burrs that you cut. I can accomplish it with the flip-lever, it would just be easier (at times) if the T-wrench didn't ratchet. But for cutting soft metal, I love that ratchet and the ability to move the handle without changing my grip is very appreciated. Overall, I think this set is a winner. I understand that it is not an Irwin/Hansen or even higher quality set. But for my use, that is OK and I expect to get many years of use from this set. I already have a much smaller, very cheap quality Tap and Die set that I've owned for 30+ years. Take care of your tools, use some finesse vs brute force, use cutting fluid, etc. and you can get many years even from a lesser quality Tap and Die set. :^) One update (4/23/16): I also purchased the Gator Tools V-Tap Guides that help keep the tap vertical (especially when starting the threads). The Gator Tools Tap Guide is a well made/machined part that earns a full 5-stars all by itself. Unfortunately, for this particular Tap set from GearWrench, on their smaller Taps (the Metric M5 and smaller) and (the Standard #10 and smaller), these Taps will not pass through the Big Gator Tools Tap Guide. That is because GearWrench makes the barrel (above the cutting portion of the Tap) slightly larger. Because of that design on their smaller Taps, it prevents the Tap from passing through the Big Gator Tape Guide. I've looked at these sizes in the Irwin Taps and it appears that Irwin maintains the barrel diameter so that it is not larger than the cutting portion diameter of the Tap. If something like this is important to you, then it may be worth considering Irwin vs GearWrench. I'm still happy with my GearWrench set and have some older Taps that will pass through the Big Gator tool just fine. Just thought I'd mention it as a difference for those considering this GearWrench set.

Scritto da: 338 Lapua Shooter

Good kit and good value

I purchased this kit about 5 years ago because I didn’t want to bring my snap on tap and die set to my shop where they would surely get lost or stolen by my staff. I didn’t have exceedingly high expectations of the kit but to be honest it’s just as good. As with any set you need to use a light cutting oil and as such I always use a thin oil. Over the years I have broken many bits and pieces of these types of kits, even my snap on ones and they always replace them…. But I have yet to break one of these. When I got my snap on brand products I was in the aftermarket automotive industry so I used them on a more routine basis, but now shifting careers to firearms I use different thread patterns and mostly the smaller ones which are far more prone to break, but these never have broken. To be entirely honest I paid almost half the price that they currently are selling for right now and since they’ve worked so well for me I’d have zero hesitation to buy a new set should I need them. The “big truck” brands I don’t think are any better and surely not worth the inflated cost which is likely 3-5 times as much as this kit. You’ll be happy with the kit.

Scritto da: Dexter See

Very good

Very good

Scritto da: Dustie Rose

High quality at a cheap price

For $210 I am extatic. This 114pc set performs just as good as my Snap-On set that has only HALF of the contents as this 114pc set and is twice the price. The ratcheting tap handles are elite, definitely a game changer when it comes to tight spots. Overall, I am very impressed with how these tap and die perform on both mild, stainless, and even aluminum. I would highly recommend this set to anyone.

Scritto da: ali

Very good

Great quality, love the ratchet

Scritto da: Laurence

Would love a refund or replacement

There seems a lot of play in the ratchet mechanism, and the ratchet direction lever has little resistance so when your removing the tap quickly the ratchet leaver keeps changing direction on its own account, this is extremely annoying,

Scritto da: Aivaras Ceida

Useless thing

Complete peace off ... Second time i used it and the centre ratchet mechanism fell out and i lost pressure spring

Scritto da: Mixx Cheang

Amazing!!

Very sharp and precise, bought a set of lang and did not fix a cross tread bolt almost snap the tool. Return it and bought gw tap and die set and work perfectly. Very happy with that tool safe a lot of time with the right tools.

Scritto da: MECANO

MECANO

bonjour l'outil est bien fait pour les endroit étroit merci.