NEIKO 02461A 3/4 colio Drive Impact Socket Set, SAE 1" iki 1-1/2", 8 PC, Deep/Jumbo Sockets, Chrome Vanadium Cr-V Deep SAE 9 Piece

Brand:Neiko

3.8/5

€
147.47

ĮSKAIČIUOTA Įprastų SAE DYDŽIŲ: yra aštuoni įprasti standartiniai lizdų dydžiai (1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1–1/2 colio) su pūtimo formos laikymo dėklu. AUKŠTO MATOMumo ŽENKLAI: Lengvai matomi didelio kontrasto lazeriu išgraviruoti standartinio dydžio ženklai leidžia lengvai nuskaityti esant prastam apšvietimui ir skatina darbo efektyvumą. SPECIALUS GILUS DIZAINAS: Kiekvienas lizdas turi unikalų dizainą, kuris suima plokščias tvirtinimo detalių puses, o ne kampus, kad būtų išvengta varžtų nuplėšimo ir apvalinimo. Su didelio sukimo momento smūginiu pistoletu kiekvienas standartinis lizdas susuks pačias atkakliausias tvirtinimo detales. DIDELIS LIZDAS: Šis ¾ colių smūginių lizdų rinkinys skirtas naudoti su smūginiais veržliarakčiais. 8 didelio sukimo momento, 6 taškų SAE lizdų rinkinys su ¾ colio pavara, kiekvienas didelis lizdas naudojamas kietoms veržlėms ir varžtams pašalinti iš didesnių transporto priemonių. DIDELĖS APRAŠYMAS: kiekvieno šio 8 dalių rinkinio 3/4 colio lizdo konstrukcija sudaryta iš ypač tvirto chromo vanadžio (Cr-V) plieno, kuris išvysto didesnį sukimo momentą, bet taip pat yra padengtas korozijai atspariu juodo fosfato apdaila, kad jūsų rinkiniai tarnautų ilgai. ir ilgesnis tarnavimo laikas.

Nėra vienetų

EAN: 0837013024613

Kategorijos Įrankiai ir namų apyvokos reikmenys, Elektriniai ir rankiniai įrankiai, Rankiniai įrankiai, Gnybtų ir galvučių rinkiniai, ,

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Neiko
Brand	‎Neiko
Country of Origin	‎Taiwan
Customer Reviews	4.8 4.8 out of 5 stars 3,287 ratings 4.8 out of 5 stars
Drive System	Nutsetter
Drive System	‎Nutsetter
Finish	‎Black Phosphate, Chrome, Steel
Finish Type	‎Black Phosphate, Chrome, Steel
Head Style	‎Fixed Square, Hex
Included Components	‎Carrying Case
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6 x 18.2 x 2.8 inches
Item Dimensions LxWxH	‎6 x 18.2 x 2.8 inches
Item Length	‎6 inches
Item model number	‎02461A
Item Package Quantity	‎1
Item Weight	‎12.3 pounds
Manufacturer	‎Ridgerock Tools Inc.
Material	Chrome Vanadium Steel
Material	‎Chrome Vanadium Steel
Number Of Pieces	‎8
Part Number	‎02461A
Pattern	‎9 Piece
Power Source	‎Hand Powered
Product Dimensions	‎6 x 18.2 x 2.8 inches
Size	Deep
Size	‎Deep
Style	‎SAE

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Danny Lee

Great Quality

I use these at work on a 3/4” Milwaukee impact and the sockets fit great and hold up

Scritto da: Kindle Customer

Set works great

Husband is a diesel mechanic and we bought this set because it has one very hard to find size in it. He’s used them all several times on 3/4” impact gun and they hold up great. Wouldn’t hesitate to buy this set again- even if only for the one size

Scritto da: Edward T. Potts

Great value

These are great. I like the ratchet better than proto.

Scritto da: Doug

Use on Farm equipment

Opened it up in front of my buddy. He's getting one. Very well built. Don't look like it's junk. I used it a few times. Did not have any problems. I doubt I'll ever have to but I would buy another one if I needed another one.

Scritto da: Jesse J.

Great product

I have have had this product for almost 2 years from removing lug nuts, u bolts, drit equipment, semis and trailers. I have to say for the cost compared to snap-on and other names this is a steal and I recommend. I haven't had one snap and wearing perfectly.

Scritto da: Anthony Carrington

Sockets

Good

Scritto da: Sandeep Singh

Nice

Very good

Scritto da: Damien

Sockets crack

Sockets split down the corner grooves. Both cracked on the first use i was running them on my ¾ Milwaukee impact. They may hold up with the ratchet or breaker bar but shouldnt be impact rated. I attached a picture of the bolt in the socket to show it wasnt an undersized bolt.

Scritto da: Christopher reed

New macanic

Just what I was looking for

Scritto da: Elias

Great looking set but….

This set looks awesome and the case looks great but how can this be listed as a “deep socket” when you put more steel at the half point? Left socket is jet that stays 1 7/16” all the way while this set on the right is 1 7/16” for about half then decreases?! Wth is that about.

Scritto da: Conrad L

Great for the Farm!

I bought this set for working on my tractor and excavator. It's a nice set and does the trick. I don't use it heavily so not sure how it would hold up to everyday use of a heavy duty mechanic. I was happy I went with the SAE and metric set because it gives me more options if I need to find the right size socket for pounding out pins.

Scritto da: pamela field

Good set, poor coating.

I got the metric/saw set. Good set. I added a 1 1/2” set that was sub rated for the mixed saw/metric set (which was disappointing as I need that one lots for Perkins filters) I don’t have a tone of complains bout the set initially but when I went back into my box a month later after using them once while it was snowing outside, some of the pieces started to rust. That’s concerning to me. The coating on these don’t seem to be very good, easily scraped to reveal untreated bare metal. So be sure to oil these before putting them away? I don’t really know what else to suggest. It’s hard to find a 6 point set with this amount of sockets for a similar price to I’ll deal with the quality of the coatings. Not a lot of better options.

Scritto da: PABLO

BIEN POR AMAZON un 10 . …No también por el fabricante

Buen precio y buena presentación , pero en mi caso vino ya usado y faltaban algunas cosas, AMAZON DE 10 cómo siempre me ofreció sustitución de las piezas o abono ….. lo devolví ya no quise arriesgarme a más cosas…..