Protoco 3070 standartinis 15 dalių veržliarakčių stovas, įrankių dėžutės įrankių laikiklis, įrankių krepšelis arba montuojamas ant sienos, mėlynas 15 dalių mėlynas

Brand:Protoco

3.6/5

38.77

Atnaujinkite savo įrankių dėžę arba įrankių krepšelį ir tvarkykite savo įrankius naudodami Protoco veržliarakčių stovą (The Original!), kurį galima įsigyti 12 arba 15 dalių, standartinio arba atvirkštinio. Sienų nustatymas taip pat yra galimybė tvarkingai sutvarkyti veržliarakčius. Seniai praėjo tie laikai, kai reikia ieškoti konkretaus dydžio veržliarakčio įrankių dėžės apačioje arba per stalčius po stalčiaus sukrautas šiukšles. Naudojant Protoco veržliarakčių stovą, jūsų įrankiai visada yra matomoje vietoje, todėl nesunku rasti darbui tinkamą veržliaraktį, kad ir koks būtų darbas. Įvairių spalvų mūsų veržliarakčių stovas lengvai prisitaiko prie jūsų darbo vietoje sukurtos atmosferos ir sklandžiai tampa jos dalimi.

Apie „Protoco“: „Protoco“ gamina apsauginius dangčius, plastikinius įpurškimo būdu formuojamus gaminius, skysto pavidalo milteliniu būdu dengtus gaminius, dangas, jūrinius produktus ir individualias pakuotes – visa tai gaminama JAV nuo 1977 m. Universalus: tinka tiek SAE, tiek metriniams veržliarakčiams, o veržliarakčiams telpa nuo 1 /4 iki 1 ir 6 mm iki 24 mm; Puikiai tinka jūsų dabartiniam veržliarakčių rinkiniui ir naujam nustatymui! Jis taip pat skirtas sutalpinti visus veržliarakčius 1 colio aukščio stalčiuje įrankių dėžėje arba krepšelyje. Labai patvarus: Pagaminta iš didelio tankio plastikinės medžiagos, kuri užtikrina patvarumą, atsparumą smūgiams ir ilgaamžiškumą; Įrankių rengyklė, kuri daugelį metų bus jūsų sąrankos dalis, paremta Protoco kokybe ir Pagaminta JAV!. Lengvai montuojamas: šį veržliarakčių stovą taip pat galima lengvai sumontuoti, o pakabinus įrankius ant sienos, jie lieka matomoje vietoje, todėl iš pirmo žvilgsnio galite nustatyti, koks raktas tinka darbui; Sutaupykite laiko, kurį sugaištumėte ieškodami tinkamo įrankio, ir greičiau įgyvendinkite savo projektus! Geresnis organizavimas: tvarkykite įrankių dėžę ir nebegaiškite laiko ieškodami reikalingo veržliarakčio; Mūsų 12 arba 15 dalių veržliarakčių laikiklis išlaiko juos tvarkingus ir aiškiai matomus, o ne plūduriuoja stalčiuje, paruoštas naudoti, kai jų prireiks.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Protoco
Brand ‎Protoco
Color Blue
Color ‎Blue
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 123 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎Powder Coated
Finish Type ‎Powder Coated
Head Style ‎Box End
Included Components ‎Wrench Rack
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH 11.75 x 7.13 x 1.13 inches
Item Dimensions LxWxH ‎11.75 x 7.13 x 1.13 inches
Item model number ‎3070
Item Package Quantity 1
Item Package Quantity ‎1
Item Weight ‎0.353 ounces
Manufacturer ‎Protoco
Material Plastic
Material ‎Plastic
Operation Mode ‎Mechanical
Part Number ‎3070_43_1
Product Dimensions ‎11.75 x 7.13 x 1.13 inches
Size ‎15-Piece
Style ‎15-Piece Standard
Warranty Description ‎Parts

3.6

13 Review
5 Star
76
4 Star
13
3 Star
2
2 Star
7
1 Star
2

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: Shopping Guy
Best rack if you don't need to captivate your wrenches to carry them around
This wrench rack is perfect for organizing your tools in your tool box drawer when you don't need to carry all your wrenches around. This rack is the easiest to get wrenches in and out and they sit nicely in the grooves nestled into the two foam strips on the inside of each rail that keeps them in place unless you slam the drawer pretty hard. Compared to the type of rack that captivate the wrenches this also takes up a little less height and area in your drawer. If you want a rack that captivates to tools you can check out a couple of the other reviews I submitted, but for drawer organization and pure good looks - if you typically do your work near your box these are the best.
Scritto da: ED
Good rack, nice quality
These fit my snap-on wrenches well. Sizes 10-24mm. Im not sure how well they would work with the craftsman wrenches that most guys have for home since those are a little bulkier. These hold up well for everyday use in the shop though. I tend to like the gripper style better myself. The wrenches wiggle around in these some. Not a big deal I just like how the gripper style racks hold them tight and allow you to grab the entire rack and carry it around if needed. The quality of these are very good though. And a lot cheaper on amazon than off the matco truck. I give 4.5 stars.
Scritto da: Warren and Christine
Standard
Pretty much the standard in wrench racks. My others I've had for forever now. The foam on this initially had the wrenches sitting high up in the grooves but over time they settle in. I just wish they still had the clip that went over the rack that held them in place in case you needed to take them somewhere. I'm not a fan of the clip in style racks because I don't want to fumble getting a wrench. Time is money and I don't need frustration.
Scritto da: RB211
Perfect For Drawer Use
Perfect if you keep your wrenches in a tool box drawer. The addition of the raised, foam down each side is a nice feature, however I'm sure it will compress over time and not be as effective at keeping each wrench placed.
Scritto da: Wesley Schaefer
Cheap 3d printed
They hold wrenches. But don't breathe on them wrong or else they fall out of their slot. So it if they or in a tool box drawer like mine they will all fall out all over every time you open or close your drawer. Make your own or buy better ones.
Scritto da: JerseyBoy0034
Yes please
These are the best for containing large four way angle wrenches up to 1 1/4” and still having them fit in a drawer. Also work great for double box end offset wrenches.
Scritto da: Chris A.
... this is the only one that is worth a crap. I wish they made version with one straight ...
I've tried several wrench organizers and this is the only one that is worth a crap. I wish they made version with one straight side for a slightly more efficient use of drawer space.
Scritto da: Gary Barrentine
Does a good job.
Fits in tool cart drawer. Keeps ratcheting wrench in place and organized. Does not slip when drawer is closed.
Scritto da: Tim
excellent
Solid low profile wrench rack will let you put a complete set of 15 wrenches into a low profile drawer. These have thick teeth and solid construction so they hold up well. The 15 wrench versions can be hard to find sometimes, so very happy to be able to buy them again. Use along with the reverse style to load up your drawer with little wasted space.
Scritto da: Mark T
The best wrench racks!
Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.
Scritto da: Mark T
Best wrench racks!!
Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.
Scritto da: Amazon Customer
Not sure why one picture says magnetic, because it is not.
Looks good, better suited for in a toolbox than hanging on the wall. Not sure why one picture states it is magnetic because it definitely is not. I bought this under the impression that it was magnetic.
Scritto da: Uncle Evil
Original Wrench Racks for a good price. Wish I could buy the reverse version ...
Original Wrench Racks for a good price . Wish I could buy the reverse version as well for the same price .

Susiję produktai

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array