Sunkiai randamas tvirtinimo elementas 014973211714 „Phillips“ plokščias srieginis varžtas, 1/4 x 1–3/4 colio, 25 dalių

Name: Sunkiai randamas tvirtinimo elementas 014973211714 „Phillips“ plokščias srieginis varžtas, 1/4 x 1–3/4 colio, 25 dalių
Brand: Hard-to-Find Fastener
SKU: 0738287112290
Price: 31.43 EUR
Availability: InStock

Brand:Hard-to-Find Fastener

3.5/5

€
31.43

Turime platų tvirtinimo detalių asortimentą, idealiai tinkančių įvairioms reikmėms namuose, ūkyje, versle, automobilių pramonėje ir pramonėje. Dauguma mūsų tvirtinimo detalių yra padengtos lengvu cinkuotu plienu, todėl paviršius yra atsparesnis rūdims. Taip pat prekiaujame dengtais ir nerūdijančiais gaminiais, užtikrinančiais papildomą atsparumą rūdims. Turime įvairių rūšių tvirtinimo detalių – nuo mažai anglies dioksido į aplinką išskiriančio plieno iki grūdinto, termiškai apdoroto plieno. Ne visos tvirtinimo detalės tinka visoms reikmėms, todėl būtinai nuodugniai patikrinkite ir gaukite licencijuoto statytojo arba sertifikuoto pastato ar statybos inžinieriaus nuomonę, prieš pasikliaudami šiomis tvirtinimo detalėmis bet kokiomis situacijomis, kai dėl gedimo gali būti padaryta žala turtui ar asmeniui.

Suma

Į krepšelį Pirkti dabar

EAN: 0738287112290

Kategorijos Pramoniniai ir moksliniai prietaisai, Vinys, Varžtai ir tvirtinimo detalės, Sraigtai, Sriegikliai į betoną,

Galvos stilius: plokščia (Phillips). Apdaila: Blue Ruspert. Medžiaga: Plienas. Ilgis: 1-3/4 colio. Skersmuo: 1/4. Galvos stilius: plokščia (Phillips). Apdaila: mėlynas ruspertas. Medžiaga: Plienas. Ilgis: 1-3/4 colio. Skersmuo: 1/4 colio.

Drive System	Phillips
Exterior Finish	Steel
Head Style	Flat
Item Dimensions LxWxH	4.25 x 2.62 x 1.25 inches
Item model number	014973211714
Manufacturer	Hard-to-Find Fastener
Material	Steel
Product Dimensions	4.25 x 2.62 x 1.25 inches; 4.94 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Chris K

Good alternative to the major brand

Just used these in a concrete slab, worked as expected after drilling the proper size hole. My only issue is that the blue coating on the screws was pretty thick on a few (I had three that were not usable) of the screw heads, which prevented the screwdriver head from inserting far enough to get a good hold to tighten the screw, it started to tighten, but as soon as you needed any real torque the bit would start slipping in the screw head. Most of the screws were not like that, and worked perfectly. I anticipated using all of these screws for my project, but unfortunately could not use them all.

Scritto da: cfc

Couldn't find this exact size in local branches of HD or Lowes

I screwed them in using my 1450 Nm torque impact driver. No issues at all. (I mention this because with this driver I have unwillingly destroyed many screws over the years, including ripping off entire screw heads)

Scritto da: Theodore Lancia

The item wasn’t in the bag yesterday, it was today 9/6/20

The amazon envelope was empty yesterday, it was re delivered today and my box of screws were in there. Thank you so much for correcting the problem. You people are wonderful. They were little concrete screws that are hide to find. Thanks again and god bless you all for your hard work. 9/6/20

Scritto da: Robert W

Ok had some heads snap off a few of them.

All conditions the same with each screw but had the heads snap off a few of them. Could of been me or the quality of screws has just become terrible over the years. It seems to happen more and more.

Scritto da: Edmund

They work

We were getting ready for a hurricane and I was fairly sure the local stores would be wiped out of these. I ordered these and they came right away (thank you Prime). I put up plywood for my place and the neighbors too, no problems with these at all.

Scritto da: melvin artis

Dependability

No screwing around!,these worked just fine for me.

Scritto da: Jeremy

Predrill holes at least an inch longer than the screws

Make sure you predrill holes deep enough, the heads broke off of 4 different ones, leaving the rest of the screw exposed. I had to use vice grips to get the broken parts out, then drill deeper into the concrete foundation

Scritto da: Heidi

Great fastener for a tough task.

Secured granite table tops and counters to frames...bite so easily and strong.