Super Sculpey tvirtas pilkas, aukščiausios kokybės, netoksiškas, tvirtas, modeliuojantis polimerinis molis, krosnyje kepamas molis, 1 svaras. Puikiai tinka visiems pažengusiems skulptoriams, menininkams, modelių kūrėjams ir kino studijoms.

Brand:Polyform

3.7/5

42.83

Universalus – aukščiausios kokybės formuojantis molis, kuris yra tvirtas, tačiau lengvai perdirbamas. Puikiai tinka patyrusiems skulptoriams, menininkams, modelių kūrėjams ir kino studijoms. Polimerinis molis yra universali priemonė, puikiai tinkanti bet kokio amžiaus amatininkams / gamintojams. Šis molis puikiai tinka modeliavimui, lipdymui ir modelių gamybai. Po detalėmis naudokite armatūrą, nes paprasti formavimo įrankiai gali lengvai sujungti siūles ir pridėti nuostabių detalių! „Super Sculpey“ yra atsparus dūžiams ir drožlėms po kepimo jūsų namų orkaitėje. Polimerinis orkaitės kepimo molis – Sculpey molis atitinka ASTM D-4236 ir EN 71 saugos standartus, yra netoksiškas ir saugus naudoti jūsų namų orkaitėje. Tiesiog priverskite savo polimerinę orkaitę kepti molio kūrinį ir kepkite savo namuose arba skrudintuvo orkaitėje 275 °F temperatūroje apie 15–30 minučių, priklausomai nuo kūrinio dydžio. Iškepus galima šlifuoti, gręžti, raižyti ir dažyti vandens pagrindo akriliniais dažais. Šis krosnyje kepamas molis neišdžius, todėl neskubėsite kurdami ir neskubėsite užbaigti projektų, kaip tai darote su oru išdžiūvusiu moliu. Smagus kūrybiškumas – ši krosnyje kepti polimerinis molis puikiai tinka bet kokio tipo skulptūroms ar modeliams. Yra trijų tvirtumo lygių – minkštas, vidutinis ir kietas – naudokite visus tris kartu savo skulptūroms. Dažykite akriliniais dažais, kai jūsų skulptūros bus iškeptos jūsų namų orkaitėje.

Nėra vienetų
Pagaminta JAV –  ​​Netoksiškas polimerinis molis – šis polimerinis molis yra saugus, nes atitinka ASTM D-4236 ir EN 71 AP saugos standartus, todėl yra netoksiškas. Smagu dažyti ir apdailinti – iškepus galima šlifuoti, gręžti, raižyti ir dažyti vandens pagrindo akriliniais dažais. Pilka spalva – leidžia lengviau matyti šešėlius, o tai suteikia kuo daugiau detalių jūsų skulptūroje. Tai tvirčiausias Super Sculpey šeimos molis. Taip pat galima įsigyti minkštų ir vidutinių. Išsamios skulptūros – pasižymi puikiomis įrankių ir detalių charakteristikomis ir „neužpildo“ po įrankio. Išlieka darbingas, kol iškeps – Nedžiūsta ore. Išlieka darbingas ir lankstus, kol iškepa jūsų namų orkaitėje – nereikia krosnies. Laikykite papildomą molį, kad galėtumėte naudoti vėliau.
Age Range (Description) Adult
Batteries 1 12V batteries required.
Brand Polyform
Color Gray
Country of Origin USA
Customer Reviews 4.6 4.6 out of 5 stars 1,043 ratings 4.6 out of 5 stars
Educational Objective Creative Skill
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 2 x 2.4 x 5.5 inches
Item model number SS1SCULPT
Item Weight 1.03 Pounds
Manufacturer Polyform
Material Clay
Number of Items 1
Product Dimensions 2 x 2.4 x 5.5 inches
Recommended Uses For Product Modeling
Special Feature Flexible

3.7

8 Review
5 Star
81
4 Star
9
3 Star
5
2 Star
2
1 Star
3

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: Montana Salem
This clay is extremely firm
It’s actually almost too firm for me to work with but when I mix it with my other sculpy clay it makes it perfect! I was able to get some really good details and thin shapes that hold well!
Scritto da: Riko Ersted
This stuff is amazing!
Can do extremely fine detailing in this stuff, yet very easy to work with! Holds up surprisingly well when baked (i could do a thin mouse tail without wire!). Just be careful about how you do it, as it will burn and bubble in any thin parts if you're not careful. Apparently burying your project in flour while you bake it helps.
Scritto da: Plissken
Too hard
This is difficult to work with your hands, and I'm a fairly strong man. Sculpting the block with tools would be fine. However, the product is not meant to be worked with your hands.
Scritto da: Carol S. Rosinski
Excellent Sculpting Clay
Super Sculpey Firm and Medium Blend feel and act more like 'regular' Plasticine modeling clay than any other polymer clays that I've tried. Compared to the Med. Blend, Firm is harder to knead at first. After it's conditioned, it's soft to work with, however. It can take a little more handling without deforming than the medium blend can, it can hold a little more of its own weight, and it carves a little better too. It blends just as excellently as medium blend. Although it is stiffer at first, after it's conditioned I'd have a hard time telling it from medium blend. So much so that I'm sure I'd get them mixed if I was using them at the same time. Since it is stiff at first, if you don't have a pasta machine to roll it with, or a significant other with larger hands than you, I suggest using the 'two handed method' to condition the clay. Simply cup one hand over the other and let your fingers help each other to push and knead the clay. So, two thumbs push against eight fingers braced against each other, and so on and so forth. I know it sounds childlike and simple, but you'll be surprised how much easier this 'two hand' kneading technique is on your hands. Have fun sculpting! Carol
Scritto da: Marsha Sawyer
Great for Sculpting!
So I've used this product ever since I started learning to sculpt. This clay is much harder than regular polymer but i think you can get more detail with it because of that. You have to roll it around quite a bit for it to soften up before use but it stays soft for quite awhile after that, moving very easily and taken details easily as well. You bake it in the oven once finished sculpting and then can paint it with acrylics. I've also seen people drill in to it after hardening to add more pieces to the sculpture or whatever you need to do. I bakes and cools very quickly so little waiting time. Attached are a few of the sculptures I've completed with it.
Scritto da: Frank and Beans
Clay animation
My teen picked this and loves it for starting his clay animation projects!
Scritto da: J. Stan
Its Super Sculpey only firm. :-)
If you work with Super Sculpey and find it hard to keep detail or edges in your sculpt then it might be too soft. This can be caused by being too warm or too new. Sitting your clay out for several days, chilling it or even pressing it in cloth can firm it up but thats tedious and time conduming. Super Sculpey firm saves the trouble shooting and holds the detail you need right out of the package.
Scritto da: Isaiah
Basic sculpting clay
If you are new to sculpting, Sculpey Firm may not be what you want to start with. I would suggest Sculpey Original. Firm is much more dense, and can be difficult to work with for a beginner. But for those of you who are a little more experienced, you shouldn't have any issues with this clay. Plus, it tends to not be as fragile as Sculpey Original can be after curing/baking.

Susiję produktai

hot

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array