Westinghouse Lighting 101000 Saf-T 0 tvirtinimo lubų ventiliatoriaus dėžė, 15,5 kub X 2-3/4 in L X 12-1/2 in W X 1-1/2 in D, x x x Sidabras 15,5 kub x 2-3/ 4 in P x 12-1/2 in P x 1-1/2 D Sidabras

Name: Westinghouse Lighting 101000 Saf-T 0 tvirtinimo lubų ventiliatoriaus dėžė, 15,5 kub X 2-3/4 in L X 12-1/2 in W X 1-1/2 in D, x x x Sidabras 15,5 kub x 2-3/ 4 in P x 12-1/2 in P x 1-1/2 D Sidabras
Brand: Westinghouse Lighting
SKU: 0784497811430
Price: 69.73 EUR
Availability: InStock

Brand:Westinghouse Lighting

3/5

€
69.73

Westinghouse 0101000 Saf-T-Brace leidžia saugiai sumontuoti lubų ventiliatorių arba šviestuvą keturiais paprastais žingsniais – nereikia patekti į palėpės erdvę. Idealiai tinka montuoti pertvarkymo metu, tvirtinimo atrama gali būti montuojama baigtose lubose per 4 colių skylę. Šis įtvaras yra suderinamas su lubų ventiliatoriais iki 70 svarų. „Saf-T-Brace“ yra su viskuo, ko reikia montavimui, įskaitant paprastas instrukcijas. Kiekviename gale yra keturi dantukai ypač tvirtam sukibimui ir atskirai įsukami į sijas, kad būtų užtikrintas didesnis saugumas ir stabilumas. Kad būtų lengviau, elektros dėžutę galima pastatyti bet kurioje petnešos vietoje, kad atitiktų jūsų projekto poreikius. Jis veikia su esamomis 16–24 colių pločio lubų sijomis. Įtvaros 15–1/2 kub. colio, 1–1/2 gylio, dvigubo tvirtinimo elektros dėžutėje yra 8–32 sriegiai dengiančioms plokštėms ir lengviems šviestuvams bei 10–24 sriegiai lubų ventiliatoriams ir šviestuvams. Jame taip pat yra Saf-T-Cap, apsaugantis varžtus ir laidus montuojant ir dažant gipso kartoną. Įtvaras yra įtrauktas į UL/CUL sąrašą ir palaiko šviestuvus iki 150 svarų 16 colių centruose ir 50 svarų 24 colių centruose. Jis palaiko gerbėjus iki 70 svarų. Prekės nuorodos numeris 01010.

Suma

Į krepšelį Pirkti dabar

EAN: 0784497811430

Kategorijos Įrankiai ir namų apyvokos reikmenys, Apšvietimas ir lubų ventiliatoriai, Glaustuvų ventiliatoriai ir priedai, Papildoma įranga, Montavimo adapteriai,

Montuojamas be prieigos prie palėpės. Tinka visiems lubų ventiliatoriams. Tinka nuo 16 colių iki 24 colių lubų sijų.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Westinghouse Lighting
Brand	‎Westinghouse Lighting
Color	Silver
Color	‎Silver
Controller Type	Pull Chain Control
Controller Type	‎Pull Chain Control
Customer Reviews	4.1 4.1 out of 5 stars 101 ratings 4.1 out of 5 stars
Electric fan design	Ceiling Fan
Electric fan design	‎Ceiling Fan
Included Components	Hardware;Fasteners & Hooks;hardware-braces
Included Components	‎Hardware;Fasteners & Hooks;hardware-braces
Is Discontinued By Manufacturer	‎Yes
Item model number	‎101000
Item Package Quantity	‎1
Item Weight	‎1.76 pounds
Manufacturer	‎Westinghouse
Model Name	101000
Model Name	‎101000
Mounting Type	Ceiling Mount
Mounting Type	‎Ceiling Mount
Number of Blades	4
Number of Blades	‎4
Part Number	‎0101000
Product Dimensions	‎19.75 x 15.5 x 16.25 inches
Size	‎15.5 cu-in x 2-3/4 in L x 12-1/2 in W x 1-1/2 in D
Special Feature	Lightweight
Special Feature	‎Lightweight
Special Features	‎Lightweight
Style	Modern
Style	‎Modern
Warranty Description	‎"no ifs/ands/buts" ultimate lifetime warranty - if a fan is defective due to faulty materials or workmanship, westinghouse will repair or replace the ceiling fan for the lifetime of the fan.

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Berserker

Works as advertised but beware of common sense pitfalls

Device works as claimed but there were a few challenges. You have to make sure your hole will be somewhat spaced between the joists. Might be a challenge w/o a stud sensor. Insulation in the attic may get in the way so be aware of that, especially if it's blown in. That was a real pain. I used an existing light fixture hole which was only 3" in diameter and this required a 4" hole so cutting may be required in your application.. Since it was an existing fixture, the old bracket had to come out. That was some work but I used a trick to remove it w/o having to brave the attic (which isn't that the point of using this device after all?), You will probably be working off of a ladder so that presents some obvious challenges as well. Now that its done I'm glad I did it and the ceiling fan doesn't wobble one bit even on high. I give it 4 stars just because the instructional video doesn't really address what to most would be the common sense items I described above. It may be easier for some to go into their attic and do it directly rather than using this but it is a clever way to get a stout support for a ceiling fan.

Scritto da: Dennis Cooper

Great ceiling fan mount

Great mount. Only thing i was lucky to have attick access to it cuz otherwise i don’t know if i was able to to tighten it down through a small hole, or you would have to cut the drywall down, but that is the whole point in buying one of these. i just wish the mounting pole would be the shape of a wrench so you can tighten it with a tool and not with a bare hand. 4 stars from me. only because it is hard to fix it in a position really nice and strong by bare hand through a small hole.

Scritto da: TheMadReview

Item is not a twist to tighten.

Normally with these styles this is twist to tighten. If you are looking for that easy install this is not the one.

Scritto da: PAUL UNDERWOOD

Know when to brace

Very heavy duty and will support any light or fan I would ever use in my home. I ended up in the attic space to install instead of going through the ceiling. My home was built in the early seventies by carpenters who took pride in using a lot of big nails to anchor electrical boxes. The opening was big enough to undo the wiring and no room to attack the very secured metal box. I used a 2x4 and hammer until my wife came in and screamed at the mess the popcorn ceiling was making on the carpet beyond where the drop cloth covered. In the attic, where it was so hot lead was melting, I made my way to the box and removed it along with a pound of nails and installed the brace. One more to install late this winter.

Scritto da: jane freas

westinghouse brace for ceiling fan

my handyman had to take the brace apart in order to get it between the ceiling joists, but had no problem installing after that, the screws into the fixture from the fan appeared at first not to fit, but after some manipulation, he was able to tighten them into place and it all went well after that, it was the first brace he ever saw that had screws at the ends to attach to the joists, i guess most have springs, so i would think this would hold better because of it, good product!

Scritto da: BrettMan

Very solid

Very solid and sturdy. My studs were only 13 inches apart so I actually had to use a hacksaw and cut this down, which was a pain, but easier than trying to get to the store during lockdown! I actually had access to the attic so I installed it from above, but it seems like trying to install it from below might be a challenge. It is very solidly installed and the fan doesn't move an inch, even on high.

Scritto da: Robert P. Dyer

Strong sturdy, but by a mold ring with it.

Easy to install and screw in. Very sturdy and rugged. But, be sure to buy a mold ring along with it because you may need to adjust the hole { cut out sheet rock } for the perfect fit.

Scritto da: Bryan Hryszkanich

So close to being great

Let me start out by saying the only reason I rated this bad is because the bar that goes across is round, so the bracket that goes over it doesn't stay tight (it moves back and forth). The instructions said not to overtighten it, but if you dont the hook is not sturdy and the fan rocks. I guess I over tightened it trying to stop it from rocking because the bolt that holds it together snapped in half. If this cross bar had been square rather than round this wouldn't have been an issue. I did love how you turn it to tighten it into the wood beams.

Scritto da: Zoron

Works great

No guessing getting the outlet to be flush to the ceiling. Super easy to install!

Scritto da: Lesa

Great

Happy ????