AmpFlow P40-250-P šlifuotas elektros variklis, 250 W, 12V, 24V arba 36 VDC, 3400 RPM

Brand:AmpFlow

2.8/5

107.82

„AmpFlow P40-250-P“ yra didelio sukimo momento blynų stiliaus variklis, sukurtas užtikrinti gerą našumą ir efektyvumą už ekonomišką kainą. Tai pasiekiama naudojant keturis šepečius ir pažangų elektromagnetinį kompiuterinį modeliavimą ir dizainą. Variklio skersmuo yra 4,0 colio, o ilgis - 3,2 colio. Velenas važiuoja dviem aukštos kokybės rutuliniais guoliais. Didelio gabarito variklio laidai yra 14 colių ilgio. Variklis sveria 4,2 svaro ir yra padengtas aukštos kokybės juodu milteliniu sluoksniu. Šis reversinis variklis gali būti naudojamas esant nuo 12 V iki 36 V nuolatinės srovės įtampai. Esant 24 voltams, greitis be apkrovos yra 3400 aps./min. Nominali išėjimo galia yra 250 W, esant 2800 aps./min., esant 14 A. Didžiausias efektyvumas yra 78%.Šis variklis tiekiamas su 13 dantų skriemuliu, skirtu 5 mm HTD diržui.AmpFlow® varikliai naudojami įvairiose srityse, įskaitant robotus, elektrinius paspirtukus, elektrinius dviračius ir kitas asmeninio transporto sistemas. Daugiau pasirinkimų ieškokite „Amazon“ ieškodami „AmpFlow“ variklių.

Trumpas blynų variklis su 13 dantų skriemuliu 5 mm HTD diržui. Didžiausias efektyvumas esant 24 V įtampai: 78%. Nuolatinė galia: 250 vatų (1/3 arklio galių). Apsukai be apkrovos: 3400 esant 24 voltams; Galima naudoti esant nuo 12V iki 36VDC įtampai. Matuoja 4,0 colio skersmens (102 mm) ir 3,2 colio ilgio (81 mm).
Country of Origin USA
Item model number P40-250-P
Manufacturer Powerhouse Engineering Inc.
Package Dimensions 5.6 x 5.4 x 5.3 inches; 4.2 Pounds

2.8

8 Review
5 Star
32
4 Star
42
3 Star
9
2 Star
0
1 Star
17

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: john angelosanto
is a ok motor
for generate dc power
Scritto da: A. W.
Probably ok if you need the pulley that comes with it.
I bought this motor with the intention of removing the pulley, as the seller stated was possible in one of the answered questions. Since the motor has a D shaft and a circlip, I assumed the pulley wouldn't be pressed on (or if it was, it wouldn't truly be an interference fit). I was wrong. On top of that, the pulley seems to be made of cheese grade sintered metal, which broke when I hit it with a hard rubber mallet (part of the flange broke off). I attempted to heat the pulley with a torch to remove it, but I'm afraid because the shaft is so small/short, I'll get the rest of the motor too hot and damage it. The motor is much noisier than I expected too, though I didn't run it until after I attempted to remove the pulley, so I can't be sure if that's because I damaged the bearings. All in all, $59 + tax wasted.
Scritto da: MRB1953
Good little motor
Good little motor. Operates smooth. Appears to be well made. Would be nice to have had some better documentation for it.
Scritto da: paul
Does the job
I am using it for a Ians BFF Shaker in a flight simulator so far so good. See how long it lasts
Scritto da: Michael Pare
Misleading Photo
I should have heeded the warning from another review that showed the one-sided pulley. AND in addition to that flaw it was also cracked upon arrival! I can't imagine what use-case a one-sided pulley would serve. For double the price of the motor without the pulley, this is bad. It cost me time and extra parts to get this going.
Scritto da: Enrique I
My pulley doesn't have one end.
The motor is ok, but the reason I put 3 stars is that the pulley in the ilustration and the pulley of the motor I received, are not the same. My pulley doesn't have one end. I attach some photos, so you can check the two pulleys are slightly different. Regards.
Scritto da: Donald Rogers
This is the best motor for the job.
I didn't dislike any part of it.
Scritto da: James Klingbile
works
Prompt delivery, item was as advertised

Susiję produktai

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array