Anderson Metals 56101-04 žalvario vamzdžių jungiamoji detalė, barstock trišakis, 1/4 x 1/4 x 1/4 NPT moteriškas vamzdis

Name: Anderson Metals 56101-04 žalvario vamzdžių jungiamoji detalė, barstock trišakis, 1/4 x 1/4 x 1/4 NPT moteriškas vamzdis
Brand: Anderson Metals
SKU: 0719852935728
Price: 30.75 EUR
Availability: InStock

Brand:Anderson Metals

3.9/5

€
30.75

Šis Anderson Metals 56101 barstock trišakis yra žalvario vamzdžio jungtis su 1/4 vidinio NPT sriegio. T formos jungiamoji dalis yra T formos ir turi tris angas trims vamzdžiams sujungti ir atšakyti, du ant pagrindinio bėgio ir vieną atšaką 90 laipsnių kampu nuo trišakio vidurio. Trišakių vamzdžių matmenys pavaizduoti kaip A x B x C. A ir B nurodo pagrindinį jungiamosios detalės eigą, o C nurodo šaką. Jame yra vidinių nacionalinių vamzdžių kūgio (NPT) sriegių, skirtų prijungti prie išorinių sriegių vamzdžių, todėl sandarumas yra tvirtesnis nei tiesūs sriegiai. Ši armatūra pagaminta iš žalvario, kad būtų atsparus korozijai, plastiškumas aukštoje temperatūroje ir mažas magnetinis pralaidumas. Žalvarį galima prijungti prie vario, žalvario, plastiko, aliuminio ir suvirinto plieno. Jungiamojo darbo temperatūros diapazonas yra nuo -65 iki +250 laipsnių F. Ši jungtis atitinka Amerikos bandymų ir medžiagų draugijos (ASTM) B584 ir Amerikos mechanikos inžinierių draugijos (ASME) / Amerikos nacionalinio standartų instituto (ANSI) B16 kokybės specifikacijas. užtikrinimas. Vamzdžių jungiamosios detalės yra komponentai, naudojami vamzdynų prijungimui, užbaigimui, srautui valdyti ir vamzdynų krypčiai keisti daugelyje skirtingų pramonės šakų. Pirkdami vamzdžių jungiamąsias detales, atsižvelkite į pritaikymą, nes tai turės įtakos medžiagos tipui, formai, dydžiui ir reikalingam ilgaamžiškumui. Jungiamosios detalės yra srieginės arba be sriegių, įvairių formų, stilių, dydžių ir tvarkaraščių (vamzdžio sienelės storis). Anderson Metals gamina žalvario jungiamąsias detales, vožtuvus ir vamzdžių antgalius. Įmonės, įkurta 1951 m., būstinė yra Kanzas Sityje, MO.

Suma

Į krepšelį Pirkti dabar

EAN: 0719852935728

Kategorijos Pramoniniai ir moksliniai prietaisai, Hidraulika, pneumatika ir vandentiekis, Fitingai, Vamzdžių jungtys,

Šiose jungiamosiose detalėse yra švino, todėl pagal federalinius įstatymus JAV ir jos teritorijose neleidžiama jų montuoti geriamojo vandens reikmėms. Atitinka ASTM B584 kokybės užtikrinimo standartus ir ASME/ASMI B16 technines specifikacijas. Darbinės temperatūros diapazonas nuo -65 iki +250 laipsnių F. Žalvaris atsparus korozijai, plastiškumas aukštoje temperatūroje ir mažas magnetinis pralaidumas. Išoriniai NPT sriegiai, skirti prijungti prie vamzdžių su išoriniais sriegiais. Trišakis su trimis angomis trijų vamzdžių sujungimui ir šakojimui.

Brand	Anderson Metals
Color	Brass
Connector Type	NPT Female
Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Brass
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	1.5 x 1.1 x 0.7 inches
Item model number	56101-04
Manufacturer	Anderson Metals
Material	Brass
Number of Pieces	1
Product Dimensions	1.5 x 1.1 x 0.7 inches; 2.4 Ounces
Size	0.25 Inch
Thread Type	NPT

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Jman

Solid brass T

Great solid product, properly threaded, used with thread tape and hasn’t leaked.

Scritto da: Charles W.

Nice Brass 1/4 NPT Tee

I agree with other reviewers who have stated that the picture is not accurate. The fitting is turned down to a round pipe-like end on all three arms of the T - unlike what the picture shows. I deducted one star from the review for the inaccurate and misleading picture. In terms of functionality, in most cases this will not affect the use of the fitting. These are brass 1/4 NPT fittings not 2” steel fittings - You do not crank away with all your strength with your biggest monkey wrench to make the fitting leak-tight. Personally I use Teflon thread tape on the threads, some people use thread goo of some type to make the fittings absolutely leak-tight. In any case, brass fittings are generally more accurately manufactured and turned so they do not require as much pressure in tightening the fittings as larger galvanized iron fittings. I found the fitting to be exactly what it is - a 1/4 NPT brass Tee, female all three ends. The Threads seem accurately made and fit exactly with my male 1/4 NPT pipe fittings. By the way 1/4 NPT is the size frequently used on compressed air fittings in the USA. The 1/4” refers to the nominal inside diameter of the pipe. The diameter of the threaded hole is obviously larger.

Scritto da: L. Ball

Worked Well, Used on Smittybilt Compressor

I modified my Smittybilt compressor so it shuts off when not being used. Was a great add and really assisted in functionality. The only downfall is the supplied soft case no longer works. So Im shopping for a new option. You cannot see the actual pressure switch because I used a piece of kydex to cover and protect.

Scritto da: TolkienFan

Excellent, Strong Tee

I really like Anderson's brass fittings.... And this one is certainly one of the best. This barstock tee is extremely strong and well made. I found the threads to be well formed and well within the "standard" for size. They felt extremely "smooth" going together and all appropriately sized fittings mated up perfectly without bottoming or leaking. The sidewalls are strong and allow for a good gipping surface for tightening and retention in place without danger of damage or collapse of the fitting due to tool pressure. I don't believe there is a better product on the market for it's intended usage. Five (5) stars for a great product at a reasonable price. While in the process of a project, I purchased several of these tees in different sizes and configurations....this is one of them. I have posted a substantially similar review for each of the tees I purchased....

Scritto da: H. Stewart

Works well, not a showroom piece

Good quality, except it had a minuscule thread defect, I’d have guessed the threading operation stopped and restarted because there was a line following the contour of the threads in one hole. Doesn’t leak so I’ll rate it high. Has somewhat of a banged up finish, minor dings and dents, none larger than a sixteenth of an inch wide nor deep. But it works fine. I’m using it to rebuild a 6 gallon air compressor valve system.

Scritto da: Steven Pierce

25% off them had threads cut too deep that I couldn't get a seal with teflon tape or thread sealant

3 of the four worked as expected but couldn't finish project on time because I had to re order to replace one that had its threads cut too deep and I couldn't get a proper seal. I did have this in a system on a Nitrogen bottle where it was subject to 2500psi. May have been good enough for less pressure.

Scritto da: Mr. TP

Worked well

Fit my application fine

Scritto da: NottaReviewer

Works like it should, thanks.

Use this along with a few other parts to make a pressure gauge to test my PC water cooling system for leaks. Just as described and works great

Scritto da: Matthew12222

Completely great functional part.

I used the part to rebuild an air compressor The threads looked fine and sealed well. The exterior finish was rough, but I didn't buy it for beauty.. It would be easy to polish if someone needed to. Love the square billet easy to hold with a wrench. I received the parts in the image.

Scritto da: fred w.

Tee fitting

As described

Scritto da: Cycler

Very good

Very good!