Draw-Tite 24756 1 klasės priekabos kablys, 1-1/4 colio imtuvas, juodas, suderinamas su 2008-2008 Chevrolet Cobalt Sport, 2005-2010 Chevrolet Cobalt SS, 2006-2011 Chevrolet Sa HHR, I20305

Name: Draw-Tite 24756 1 klasės priekabos kablys, 1-1/4 colio imtuvas, juodas, suderinamas su 2008-2008 Chevrolet Cobalt Sport, 2005-2010 Chevrolet Cobalt SS, 2006-2011 Chevrolet Sa HHR, I20305
Brand: Draw-Tite
SKU: 0742512247565
Price: 541.20 EUR
Availability: InStock

Brand:Draw-Tite

3.2/5

€
541.20

Norite vilkti nedidelę priekabą, bet nenorite patirti didelių išlaidų ar rūpesčių dėl didelio, sunkiai montuojamo kablio savo automobiliui ar CUV? jei taip, I klasės „Sportframe“ imtuvų „Draw-Tite“ linija yra puikus pasirinkimas. Ekonomiškas įsigyti, greitai ir paprastai montuojamas su pridedama tvirtinimo įranga – nereikia gręžti ar suvirinti. Kiekvienas „Sportframe“ I klasės kablys turi 1–1/4 kvadratinio imtuvo vamzdžio angą ir yra sukurtas taip, kad puikiai priglustų prie jūsų konkrečios transporto priemonės rėmo ir (arba) buferio, idealiai tinka vilkti dviračius, vandens motociklus, palapines ir kt. Visiškai suvirinta konstrukcija, užtikrinanti maksimalų stiprumą ir saugumą, kartu su A-Coat pagrindu ir juodu milteliniu sluoksniu, užtikrinančiu ilgaamžiškumą ir atsparumą korozijai, šie kabliai yra iki 200/2000 svarų (TW/GTW) talpos ir puikus pasirinkimas norint leistis į kitą nuotykį. Nuimamas grąžulas, kaištis ir segtukas parduodami atskirai. „Draw-Tite“ yra pirmaujantis pritaikytų priekabų kablių prekės ženklas. Įkurta 1946 m., „Draw-Tite“ gimė iš aistros išskirtiniam našumui ir tapo vienu iš geriausių pagal užsakymą pritaikytų transporto priemonių gaminių, kuriuos šiandien galima įsigyti. Kiekvienas suprojektuotas kablys turi išlaikyti griežtus testus, kad taptų tvirtas. Dėl padidinto liežuvėlio svorio ir integruoto prikabinimo įtaiso, visiškai naujos priedų poravimosi vadovo, „Draw-Tite“ yra pasirinkimo prekės ženklas, skirtas patikimai tarnauti ilgus metus.

Suma

Į krepšelį Pirkti dabar

EAN: 0742512247565

Kategorijos Automobiliai, Eksterjero priedai, Vežimo priemonės ir gervės, Sukabinimo įtaisai, Priimtuvai,

Universalus: šis „Draw-Tite“ I klasės kablys skirtas tik tokiai markei ir modeliui: 2008–2008 m. „Chevrolet Cobalt Sport“, 2005–2010 m. „Chevrolet Cobalt SS“, 2006–2011 m. „Chevrolet HHR“, „2008-2010 m. G5 GT, 2005-2007 Saturn Ion 3, 2004-2006 Saturn Ion Red Line. TALPA: įvertinta iki 2000 svarų. GTW ir iki 200 svarų. TW. NETINKAMAS naudoti su svorio paskirstymo sistemomis. 1–1/4 colio imtuvą galima prijungti prie rutulinio laikiklio, dviračių laikiklio, krovinių laikiklio ar kito lengvo priedo. IŠBANDYTA: „Draw-Tite“ prikabinimo įtaisai yra tikrinami dėl kokybės ir darbo kokybės ir yra išbandyti, kad atitiktų ir viršytų V-5 ir SAE J684 standartus. STIPRIMAS: Pagamintas iš tvirto, visiškai suvirinto plieno, kad būtų užtikrintas maksimalus stiprumas ir saugumas, kiekvienas kablys yra kruopščiai nuovargis ir išbandomas nepalankiausiomis sąlygomis, kad atlaikytų netinkamą kelią (neviršijant nurodytų pajėgumų). Kiekvienas iš jų taip pat yra padengtas dviejų dalių juodu milteliniu sluoksniu, kad būtų atsparus rūdijimui ir korozijai. PRISTATYMAS DIZAINAS: „Draw-Tite“ I klasės priekabos prikabinimo įtaisai gaminami pagal užsakymą pagal gamintojo specifikacijas pagal gamintojo specifikacijas ir modelio metus, kad būtų užtikrintas nepriekaištingas prigludimas ir aukščiausios vilkimo savybės. Elegantiškas kompiuterinis dizainas yra patrauklus ir funkcionalus.

Brand	Draw-Tite
Brand	‎Draw-Tite
Customer Reviews	4.2 4.2 out of 5 stars 66 ratings 4.2 out of 5 stars
Finish Type	Powder Coated
Is Discontinued By Manufacturer	‎No
Item model number	‎24756
Item Weight	47.65 Pounds
Item Weight	‎47.6 pounds
Manufacturer	‎Draw-Tite
Manufacturer Part Number	‎24756
Material	Alloy Steel
Model	‎24756
OEM Part Number	‎BDTK24756
Product Dimensions	‎41.75 x 23.13 x 10.25 inches
Vehicle Service Type	Car, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Amazon Customer

We didn't get the receiver & pin wasn't long enough.

We didn't get the receiver & the pin wasn't long enough

Scritto da: dkrasniak

Excellent hitch, but a low receiver height clearing the factory bumper. Excellent value if DIY installed.

On my application, a Chevy HHR, the low hitch height is always a challenge, especially when using a cargo carrier instead of a trailer. Be aware that you will need something to raise the hitch height and may need an adapter like the 1.25" to 2" Towing Hitch Rise or Drop Extension by Rage Powersport Products that I purchased in order to be able to use a cheaper aluminum cargo carrier with a 2" tongue, anyway. Overall this is an excellent value and not too difficult to install, but if you don't have patience or some amount of mechanical skills, have a shop install it for you. Remember to lower the >>forward<< and rear muffler rubber doughnut hangers to achieve the height needed to fit the driver's side frame bolts. I forgot to do this at first, but things got much easier when I lowered the front hanger also (as per directions). This tow hitch will not be the limiting factor in how much you could tow, it will be the vehicle itself. Also, if you use an adapter and then some sort of clamp to stabilize the adapter, the bolts will hang low enough that it could easily bottom out on a driveway approach, so you may want to flip the clamp over so the bolts point upward. This hitch works well for me!

Scritto da: Mitch

Draw bar missing

This is a nicely made and heavy hitch but like the other review it came missing the draw bar. This isn't boxed, just has the bar and bolt kit shrink wrapped around the main frame and that is why the draw bar gets torn off or stolen along the way. The bolt kit was barely hanging on and fell off in my hand when I lifted it.They need to do a MUCH better job of packaging the loose parts, like MAYBE in a box ??!! I called and Amazon wanted me to return this one and they would send another. I told them that I wasn't going to play the same game as the last reviewer and that they needed to send the draw bar. I gave them the part number listed but they couldn't just send it. They refunded me enough on the initial purchase to buy the draw bar and have it sent. Seems silly that they couldn't just send it but I guess it will work out in the end. Again, this is not an issue with the product. It's a shipping issue. The hitch is excellent.

Scritto da: Jay Devenport

2011 chevy HHR

This is the second hitch I installed on a small vehicle. Substantial weight for what it is. The hardware packet and instructions make it an easy install. It's weekends is only what it is installed on. The sheer strength of the unit is much higher than the frame of the vevicle these hitches are designed for. This is a great hitch for light pulling.

Scritto da: The couch critic

Works great on a Cobalt SS

I've got over 1000 miles pulling a camper this year with the draw bar and zero issues. Install was a bit tricky on my own since one side is heavier than the other but with enough grunting it went on.

Scritto da: Amazon Customer

Missing pieces, but a good product

I have found no problems with the actual product itself. My problem is the same as everyone else's. When you received this item, it will, more than likely, be missing the drawbar, pin and clip. Amazon will work with you to resolve this matter, though.

Scritto da: Thomas

Take your time on insulation, use torque wrench and torque to the factory recommendations

Good product but the bolts are a little track to get in the frame of the car . The handy wire tool is the bomb too

Scritto da: Thomas P.

Deceptive advertising. It shows a draw bar with it in all the pictures!!!

It shows a draw bar with it in ALL the pictures!!! The other ones were 20 dollars cheaper and did not show the draw bar. DECEPTIVE ADVERTISING plain and simple

Scritto da: Jason

30 min job to install

Wd40, move four rubber hangers, drop exhaust, drilled two holes bigger, pull the bolts through (with tool provided in kit) then do the hanger nuts up tight, push exhaust up into place, push rubber hangers back into place finally let car back down off jacks and stands. Remove all wheel chalks. And you are driving to pick up your trailer or Hitch rack 30 minutes later. Have fun and play safe. (Use all safety procedures and equipment required)

Scritto da: Amazon Customer

Customer service sucks!

Company is terrible to deal with! Does NOT come with all the pieces, but elsewhere!