E-Z LOK – 319-8 E-Z Lok įdėklas su išoriniu sriegiu, C12L14 anglinis plienas, atitinka AISI 12L14, 1/2-13 vidiniai sriegiai, 5/8-11 išoriniai sriegiai, 0,625 ilgio, pagamintas JAV (5 vnt.)

Name: E-Z LOK – 319-8 E-Z Lok įdėklas su išoriniu sriegiu, C12L14 anglinis plienas, atitinka AISI 12L14, 1/2-13 vidiniai sriegiai, 5/8-11 išoriniai sriegiai, 0,625 ilgio, pagamintas JAV (5 vnt.)
Brand: E-Z LOK
SKU: 0839137000528
Price: 39.15 EUR
Availability: InStock

Brand:E-Z LOK

3.3/5

€
39.15

SVARBI PASTABA: montuojant reikia naudoti 37/64 grąžtą. STIPRI SIŪLIAI PAPRASTAI – Tiesiog išgręžkite skylę standartiniu grąžtu. Bakstelėkite skylę standartiniu čiaupu. Įsukite įdėklą atsuktuvu, varžtu / veržle arba E-Z LOK pavaros įrankiu. NAUDOJIMAS SU PRITAIKYMIS – Srieginiai įdėklai skirti naudoti su minkštais metalais: aliuminiu, ketaus, magnio ir kt. GREITAI PAKEISTUS SIŪLIUS SUREmontuokite – Greitai pataisykite pažeistus sriegius arba sustiprinkite sriegiuotas skylutes minkštuose metaluose šiais plieniniais sriegiais. MONTAVIMAS SU STANDARTINIAIS ĮRANKIAIS – 12L14 anglinio plieno srieginiais įdėklais. Sumontuokite standartiniais įrankiais. Nereikia jokių specialių grąžtų, čiaupų ar specialių montavimo įrankių. Srieginiai įdėklai metalui – E-Z LOK Srieginiai įdėklai metalui. Tvirti srieginiai įdėklai, kurie yra tvirti, lengvai montuojami ir savaime užsifiksuoja. Optimaliam metalo laikymui.

Nėra vienetų

EAN: 0839137000528

Kategorijos Pramoniniai ir moksliniai prietaisai, Vinys, Varžtai ir tvirtinimo detalės, Srieginiai įdėklai, Sriegių fiksavimo įdėklai,

Exterior Finish	Aluminum
Fastener Type	Thread Locking
Material	Steel
Metal Type	Aluminum, Alloy Steel, Carbon Steel, Iron, Magnesium
Thread Size	1/2"-13

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Vakhtang Miskaryan

Useful For the Intended Purpose

I bought this product hoping, that I could use it as a 5/8-11 male to 1/2"-13 female thread adapter as an insert, which wasn't what it was intended for. The 1/2"-13 thread is correct and works without a problem. The 5/8"-11 doesn't work, since the thread is not cut properly. I am not even sure if it is possible to make an insert adapter for such a small difference in diameter sizes, meaning going from 5/8"-11 to 1/2"-13. I am rating it 4 stars, guessing that it will work for what it is intended for, and only because it wouldn't let me submit this review without selecting any stars.

Scritto da: Corwin Brown

Thick sidewall

The sidewall was a little thick. One hole was too close to the edge and had to use a keensert instead. I like the pin lock style better anyhow.

Scritto da: Robert McCollam

I built a drum sander table and fence for my ...

I built a drum sander table and fence for my drill press and used this threaded insert for the star knob and threaded rod that control the fence position. I'm able to make micro adjustments to the fence and sand pieces down to paper thickness.

Scritto da: Dave

Repair stripped threaded bolt hole.

I needed to repair a stripped out bolt hole to the original threading and these little guys did the job. I just drilled out slightly larger then ran a tap in it to the outside thread pitch and screwed it in, done.

Scritto da: SQUEAKY

E-Z LOK Threaded Insert

HAD TO DO MACHINE WORK ON THE EXTERIOR TO BE USABLE. INTERNAL THREADS WERE "RIGHT ON" BUT EXTERNAL THREADS NEEDED TO BE RECUT !!

Scritto da: Herbert T Miller Sr

Good quality

Arrived on time. Perfect fit.

Scritto da: Lawrence Hilton

Wrong size

I have 5/8 threaded rod. These say 5/8 but the internal thread is not 5/8” the external thread is 5/8

Scritto da: K. Lord

Garbage!!!!

Garbage! Would never by this product again. Even with special driver tool cannot get these to seat properly. Save your money!