E-Z Lok išorinis sriegis įdėklas, C12L14 anglinis plienas, atitinka AISI 12L14, M6-1.0 vidinius sriegius, M10x1.5 išorinius sriegius, 10,49 mm ilgio, pagamintas JAV (5 vnt. pakuotėje)

Name: E-Z Lok išorinis sriegis įdėklas, C12L14 anglinis plienas, atitinka AISI 12L14, M6-1.0 vidinius sriegius, M10x1.5 išorinius sriegius, 10,49 mm ilgio, pagamintas JAV (5 vnt. pakuotėje)
Brand: E-Z LOK
SKU: 0839137001020
Price: 39.63 EUR
Availability: InStock

Brand:E-Z LOK

4/5

€
39.63

E-Z LOK srieginiai įdėklai metalui yra paprastas sprendimas srieginėms skylėms metale taisyti arba sustiprinti. Idealiai tinka naudoti metaluose, tokiuose kaip aliuminis ir ketus, E-Z LOK srieginiai įdėklai yra sraigtiniai iš tvirto plieno, kad būtų didesnis tvirtumas ir didesnis atsparumas ištraukimui. Standartiniai išoriniai sriegiai leidžia montuoti standartinius grąžtus ir čiaupus. Kai skylė yra paruošta, E-Z LOK įsriegiami į skylę kaip įprastas tvirtinimo elementas, naudojant atsuktuvą, varžtą ir veržlę arba pasirenkamą E-Z LOK pavaros įrankį. E-Z LOK yra savaime užsifiksuojančios ir nesitraukia ir nevibruoja. Iš anksto užtepti klijai suaktyvėja sumontavus ir prilimpa prie beveik visų metalų. Tvirtinimo elementas paruoštas per kelias minutes, klijai apsaugo nuo skysčių ir dujų iki 6000 psi slėgio. visiškai išgydžius (72 val.).

Nėra vienetų

EAN: 0839137001020

Kategorijos Pramoniniai ir moksliniai prietaisai, Vinys, Varžtai ir tvirtinimo detalės, Srieginiai įdėklai, Sriegių fiksavimo įdėklai,

Pagaminta Amerikoje – tvirtas, tvirtas konstrukcijos dizainas. Idealiai tinka minkštiems metalams, tokiems kaip aliuminis, ketus ar magnis. Savaiminis užsirakinimas; Iš anksto užtepti klijai suaktyvėja sumontavus ir yra paruošti tvirtinimui per 3–5 minutes. Įdiegti naudojant standartinį gręžimą ir bakstelėjimą; JOKIŲ specialių įrankių. Lengvas naudoti sprendimas, skirtas taisyti pažeistus metalo siūlus.

Exterior Finish	Black Phosphate
Fastener Type	Thread Locking
Is Discontinued By Manufacturer	No
Item model number	450-6
Manufacturer	EZ-Lok
Material	Steel
Metal Type	Aluminum, Alloy Steel, Carbon Steel, Iron, Magnesium
Thread Size	M6 x 1

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: El mas ondeado

Triple check for treat,tap sizes

i use ez coil to reinforce walls on a aluminum block which had a broken screw ,fits perfectly

Scritto da: Anthony Frisco

saved my transmission!

I bought a used transmission from the junk yard that had a couple pan bolts stripped so I needed to repair them because transmission fluid was leaking out. I started of buying a cheap helicoil repair kit on ebay and tried using that first. if you are considering buying an ebay kit yourself do yourself a favor and DON'T! what started as a simple repair turned into a nightmare when the very tool that is supposed to fix threads destroyed them even more. boy was I in a pickle because now not only were the threads screwed up but now the hole was also bigger than it should. I was running out of options! luckily in my search for solutions I came a crossed these clever and yet simple inserts. These inserts are quality and don't need any of the expensive specialty tools that other common thread repairs do. I was able to fix the destroyed threads quickly and easily with just these inserts, a screwdriver, a common drill and bits, and regular tap set. they work great! no more stripped threads and no more transmission leak! what a relief! I definitely recommend them especially if you've already tried other thread repairs that didn't work and you think it might be beyond repair.

Scritto da: Lou

Good

Good product. Worked as expected

Scritto da: Steven L.

Much better than helicoil

After having a failed helicoil installation, these are much better and where I start with next time. No special tools needed, just the right drill bit size, which I got from HF.

Scritto da: Ryan

They worked perfectly for my application ????

This was the answer to my problem. Had a bolt break off in the crankcase on a quad. I wasn't able to get an easy out to work after drilling it and attempting unsuccessfully to back out the remaining threads. I started researching solutions and found these little beauties! I would highly recommend these.

Scritto da: F joe biden

drill size

these worked great. Had a stripped out bolt hole on the oil plate of a VW, drilled out installed this EZlock .All Good! a metric drill bit is probably your best bet , but if you only have sae bits ,an 11/32" works perfectly.

Scritto da: Tyler

Perfect fix!

These are the perfect fix for stripped out threads! Much better than a Helicoil and way cheaper than a Timesert. Worked great! You won't regret these.

Scritto da: Ernest E. Marks

perfect for aluminum thread repair

I repaired a helicoil repair gon bad on a 1981 Honda XL500R. It worked great. I believe this is the only way to go fo aluminum thread repair.