Extreme Max 5600.3223 sportinis dviračio priekinis ir galinis ritės tipo kėlimo stovas su trigubu medžio tvirtinimu

Brand:‎Extreme Max

3.3/5

296.89

Pakelti savo sportinį dviratį techninei priežiūrai ar saugojimui yra lengviau nei bet kada anksčiau naudojant „Extreme Max Products“ sportinio motociklo priekinį ir galinį kėlimo stovą su trigubu medžio tvirtinimu. Jį sudaro du atskiri stovai, kurie veikia atskirai arba kaip vienetas, priekinis keltuvas montuojamas kaip lopšio keltuvas, esantis po priekinio rato šakėmis, arba kaip trigubas medžio stovas, kuris slysta į jūsų dviračio trigubą medį, o galinis pakeliamas stovas. sulaiko dviratį dviračio svirties (nepridedama), todėl jūsų dviratis nukeliauja nuo žemės ir yra ideali vieta priežiūrai, remontui ar saugojimui. Kaip galbūt geriausia jo savybė, kėlimo stovus yra nepaprastai paprasta naudoti. Pastatykite stovus tinkamose dviračio vietose, tada tiesiog nuleiskite rankeną žemyn, kad pakeltumėte gražiai ir sklandžiai. Tada rankena tampa stovo pagrindu, pakankamai plati, kad išlaikytų stabilumą, ir pakankamai tvirta, kad niekada nenukristų. Triple Tree Headlift komplektuojamas su penkių trijų dydžių medžių kaiščių dydžiais, kad tiktų daugumai šiandien prieinamų sportinių dviračių: 13 mm, 15 mm, 16,5 mm, 17 mm ir 19 mm. Priekinės šakės-lopšio mazgas tinka nuo 9,5 iki 12,5 pločio, o užpakalinės ritės priedas tinka nuo 10,75 iki 13,5 pločio pasukamoms svirtims. Supamosios svirties ritės yra reikalingos naudoti su galiniu kėlimo stovu ir nėra įtrauktos. Prieš naudodami įsitikinkite, kad motociklas turi pakankamai vietos prieiti prie trigubo medžio. Motociklai su per dideliais arba dideliais priekiniais gaubtais, priekinių žibintų moduliais ir sparnais gali neleisti trigubui medžių stovui patekti į tinkamas kėlimo vietas. Kaip papildomą saugos priemonę Extreme Max rekomenduoja visus dviračius pritvirtinti prie stovų diržais, kai jie pakeliami. Galimi papildomi trigubų medžio kaiščių rinkiniai, kurių dydžiai yra 20 mm, 21 mm, 23 mm, 24 mm ir 27 mm: žr. Extreme Max 5600.3222.

Trigubo medžio priedas apima penkių dydžių kėlimo kaiščius: 13 mm, 15 mm, 16,5 mm, 17 mm ir 19 mm (galimi 20–27 mm kaiščių dydžiai, žr. Extreme Max 5600.3222). Su juoda miltelinio dažymo apdaila ir keturiais ratukais ant kiekvieno stovo, kad būtų lengviau naudoti. Galinis pakeliamas stovas palaiko dviratį per sukamųjų svirties rites (parduodamos atskirai), nesuderinamas su vienpusėmis pasukimo svirtimis. Priekinis pakeliamas stovas montuojamas į šakių lopšio konstrukciją arba su trigubu medžio kėbulu (abu komplekte) – tinka maksimaliam 30 vairo kolonėlės aukščiui. Greitai ir lengvai pakelkite vieną arba abu sportinio dviračio ratus nuo žemės, kad galėtumėte atlikti techninę priežiūrą. remontas ar sandėliavimas.
Brand ‎Extreme Max
Customer Reviews 4.2 4.2 out of 5 stars 204 ratings 4.2 out of 5 stars
Item model number ‎5600.3223
Item Weight ‎25.4 pounds
Manufacturer ‎Extreme Max
Manufacturer Part Number ‎5600.3223
Model ‎5600.3223
Product Dimensions ‎20.67 x 16.93 x 12.4 inches

3.3

13 Review
5 Star
63
4 Star
16
3 Star
10
2 Star
2
1 Star
9

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: Cyndi Reeves
Works as it should. tl;dr
The media could not be loaded. Works well easy to put together. It holds it up about 3 to 4 inches off the ground. I have it so the rear is held up by the aftermarket pegs that I put on the back and the front holds up with the Paddock hole on the forks. There is these little hard plastic feet type things so when you lower it onto the ground the metal is not against the ground but within the first three to four times of picking the bike up off the ground and lowering those the plastic pieces broke right off as they would make contact with the ground with the littlest bit of force. So basically they do nothing I can see why they are there but they just break off. All three broke and then the fourth one I just took off because it's going to break eventually anyway. You don't need them though they don't do anything. The stand works perfectly fine without them. The stand is pretty sturdy holds the bike up well it rocks back and forth if you make it but from what I can tell with a couple pushes and tugs it's not going to fall over easily. You would need a decent amount of umff to knock the bike over. It doesn't take up a whole lot of space while the bike is up either maybe about a half a foot to the front and back. The bike that I have on is KTM RC 390 which weighs about 335 lb. It's easily able to be put up for me just by myself that would also depend on what bike you have mines not massive so it's basically little effort to put up and down. If you're doing it by yourself it might take a couple seconds holding the bike with your hip and arm while using your other arm to finagle the rear to line up with the pegs. Overall it's a good purchase good stand I would recommend it to others.
Scritto da: Gabriela Lujan
Stands holds up my zx14r I bet I can withstand yours
Fast shipping everything came as it said it was overall very happy with results and material as yall can see it withheld my zx14r so to anybody that outs a bad name on it they all cap probably don't know what they doing feeling fast as f*** boy sheesh
Scritto da: Kris
So far so good
Very solid. Easy to assemble. Clear instructions on how to use the triple tree attachment. So far so good. I gotta use em to see how they hold up but straight out the box they're good. Much better than some other brands.
Scritto da: Amazon Customer
Missind spring for front stand
Good product .However i only recieved 1 spring instead of 2 for the front stand.need 2 for it to function safely and properly
Scritto da: Angel
Awesome customer support and product
Had a bit of an issue with one of the rear stand parts not Being threaded properly. Sent there customer service an email and they were extremely helpful. And they responded next morning.
Scritto da: Neil Mason
Very good deal.
Very good product. It is not top of the line but far from junk. The real low price my make some people nervous of the quility of the item but you will be impressed as I was. I bought with the intention to upgrade to better ones later but discovered I don't need to. You will not be disappointed for average use.
Scritto da: Devin
Good lifts missing some parts
They r nice and sturdy but was missing 2 of the pins for assembly which made it inconvenient to say the least but did some improvisation and got it to work
Scritto da: Dan L
Can’t get larger pins to fit Ninja 400
Seems to be okay. After assembly I found that none of the head lift pins were large enough to fit my Ninja 400. When I try to look up the larger pin set they are not on Amazon and product support sends me to the manufacturer’s website where the larger pin set is listed for $21.85. When I tried to order, they are out of stock. So now the head lift part of the stand is unusable for my bike. The extra cost was disappointing enough then extra disappointing that the parts are not even available. The spool lift works ok and I have ordered swing arm pads from another seller to use with a bike that doesn’t have spools.
Scritto da: Myystik
Excellent - Good Quality
KTM 390 Adventure, Rear lift with spools is strong and sturdy. Gets the rear end up, just how we like it, and the stand holds very well. Haven't tried the front triple tree as of yet, but I'm sure it'll be fine. Your mileage may differ, but I'm pleased with these.
Scritto da: Mr W.
Wouldn't trust them on my kids push bike
Built them up, tried them on a KTM 690 Duke and found the rear to fold and twist under the "weight" of the rear. Actually bought them for my ZX10R - no way will I put a heavier bike on them. Was gonna return them, but can't deal with the hassle of dismantling and getting them, shipped back. I'll take them into work and get them strengthened / welded up. If you have access to a welder, and are prepared to work on them get em. If not, avoid like an STI. Was gonna post a pic but I am not putting my bike back up on them.
Scritto da: Osvaldo Reyna
Cumple muy bien con su función, la relación calidad precio es la adecuada, yo diria que perfecta
Cumple muy bien con su función y la relación calidad precio es fenomenal. Los materiales son ligeros pero de muy buena resistencia, reforzado, facil de utilizar, lo unico que no me agrado fueron las ruedas hubiese preferido unas de goma pero de igual manera son resistentes y duraderas, en mi caso mi moto no cuenta con spools sin embargo pude apoyarlo sobre el eje por el momento solo para lubricar cadena y lavar la moto mientras le coloco unos spools El paquete llego muy bien embalado en una caja desarmado todo (viene con una llave alen para armar las piezas sin embargo requeriras de Una llave de dado)
Scritto da: jaime morris
Excelente para mantenimiento
Buen producto, cumple básicamente con su función, lo único que no me agrada es que queda un poco levantado de las orillas tanto el parador trasero como el delantero, pero básicamente muy resistente
Scritto da: Francisco Javier Moreno Carrera
Lo uso para mis motos deportivas ya que tengo taller mecanico
Excelente calidad

Susiję produktai

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array