Geros kryptys Mančesterio kupolas su žaliuzėmis su gryno vario stogu, kipariso mediena, 18 x 22, greitas pristatymas, sustiprintos gegnės ir žaliuzės, kupolai 18 kvadratų x 22 aukščio

Name: Geros kryptys Mančesterio kupolas su žaliuzėmis su gryno vario stogu, kipariso mediena, 18 x 22, greitas pristatymas, sustiprintos gegnės ir žaliuzės, kupolai 18 kvadratų x 22 aukščio
Brand: Good Directions
SKU: 0704940211853
Price: 963.02 EUR
Availability: InStock

Brand:Good Directions

3.3/5

€
963.02

PRODUKTO APRAŠYMAS Jau daugiau nei 35 metus „Good Directions“ kupolai puikiai papildo jūsų namus, garažą, tvartą, tvartą, pavėsinę, baseino namelį, vežimą, arklių tvartą ar paviljoną. Mūsų meistriškai sukurtas, pagal užsakymą pagamintas Mančesterio žaliuzių kupolas turi stogo liejinį ir sustiprintas vidines atramas, kad padidintų tvirtumą. Jis pagamintas pagal užsakymą JAV iš aukščiausios klasės kipariso, kad būtų malonu visą gyvenimą. Mediniai kupolai turi būti nudažyti arba beicuoti. Mančesteris turi 16 uncijų, 24 gabaritų varinį, hip stiliaus stogą, kuris suteikia jūsų namams architektūrinio grožio ir ilgalaikės vertės. Mūsų kupolai pateikiami 3 skyriais, kad juos būtų lengva montuoti, juose yra surinkimo įranga ir lengva laikytis išsamių montavimo instrukcijų, be to, jie yra paruošti vėtrungėms su įmontuotu vidiniu tvirtinimo laikikliu. Taip pat yra „YouTube“ vaizdo įrašų, kurie padės žingsnis po žingsnio atlikti diegimą. Jei norite, kad jūsų namas būtų išskirtinis, pridėkite „Good Directions“ vėtrungę arba galus. IŠ GAMINTOJO Geros krypties medis Mančesterio kupolas. Šis kupolas su žaliuzėmis turi stilingą varinį stogą ir lygų pagrindą. Mūsų klasikinė kupolų linija sujungia senojo pasaulio meistriškumą su patvariomis šiuolaikinėmis statybos technikomis. Mūsų mediniai kupolai yra pagaminti iš rankomis atrinktos šiaurinės baltos pušies ir yra gražiai suprojektuoti su natūralia, neapdorota mediena. Nepriklausomai nuo to, ar naudojami dekoratyviai, ar funkcionaliai, mediniai kupolai yra bet kokios namų ar lauko konstrukcijos priedas. Jie sukurti taip, kad ilgainiui tarnautų, kai varis laikui bėgant grakščiai sensta su turtinga patina. 2118 m, 18 colių kvadratas ir 22 colių aukštis.

Suma

Į krepšelį Pirkti dabar

EAN: 0704940211853

Kategorijos Tapyba, veja ir sodas, Patalpos dekoras, Kupolai ir priedai, Kupolos,

PAPRASTAS SURINKIMAS IR LENGVAS MONTAVIMAS – Yra trijų dalių, kad būtų lengva montuoti ir pristatyti. Komplekte yra surinkimo įranga, išgręžtos skylės ir paprastas montavimo vadovas. VĖTRŪNĖ PASIPARUOŠTA – Kupolas pasiruošęs priimti gerų nurodymų vėtrungę. Stogo viduje yra iš anksto sumontuotas vėtrungės laikiklis, kad būtų lengva montuoti. PAGAMINTA JAV – Gaminama pagal užsakymą. MATMENYS – Surinktas: 18kv x 22H. Kvadrato dydis matuojamas ties stogo linija. Tinka iki 10/12 nuolydžio stogo (dauguma stogų). Skaičiuodami savo kupolo dydį, vadovaukitės mūsų tvirta statybininko nykščio taisykle: 1,5 colio kupolo pločio kiekvienai nenutrūkusios stogo linijos pėdai. Norėdami gauti daugiau informacijos, žiūrėkite nuotrauką. Ypatingas tvirtumas – Stogas turi sustiprintas gegnes. Vidurinė dalis su žaliuzėmis su mediniu rėmeliu. 18 gabaritų sunkiosios apkrovos kabės, naudojamos vietoj pavienių vinių, kad komponentai nepasislinktų ir padidintų stiprumą bei ilgaamžiškumą. 24 GAUGIO GRYNO VARIO STOGAS – 1 klasės, 16 uncijų gryno vario stogas laikui bėgant natūraliai patinuosis. PREMIUM GRADE CYPRESS – ilgalaikiam grožiui.

Assembled Diameter	‎20 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Brown
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 39 ratings 4.2 out of 5 stars
Cutting Diameter	‎20 Inches
Included Components	‎Wood Cupola, Copper Roof, Hardware
Is Discontinued By Manufacturer	‎No
Item model number	‎2118M
Item Package Quantity	‎1
Item Weight	‎18.51 pounds
Manufacturer	‎Good Directions
Number Of Pieces	‎1
Part Number	‎2118M
Product Dimensions	‎18 x 18 x 22 inches
Size	‎18" square x 22" high
Warranty Description	‎5-Year limited warranty.

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Daniel C.

Excellent quality, made in North Carolina

I bought the 30” square x 40” high Manchester unpainted cupola with copper roof, and am very happy with it. Everything about the purchase, delivery, and installation was easier and came out better than I expected. One thing I will mention, this cupola is 30” square at the edges of the roof. The description plainly says this, but it is worth highlighting. The outside of the louvered section is about 23”. I installed this as a replacement on a 24’ 2 car garage that originally had a very small cupola, and this one isn’t much bigger. Amazon delivery was LTL by their truck - super easy, I picked the 9am - noon time slot. By 9:30am a pallet with the cupola was in my garage, courtesy of a friendly driver and helper with a power tailgate equipped box truck. The cupola was in perfect condition, shipped as three pieces with the base placed over the middle section and securely clamped to the skid and stretch wrapped. Total weight around 150# I’d guess, about evenly divided between the three sections. Construction of the cupola: The base appears to be a nice quality plywood. Seven layer laminated and looks like A-C. Corners are mitered and have internal glue blocks for strength, workmanship is excellent. I know nothing about various wood species so all I can say about the center and top sections is that they are sturdy and appear well made. Pilot holes are predrilled though you’ll see I used my own fasteners so needed to adjust the pilot holes accordingly. Preparation and installation: Hardware used: 6’ or so slotted angle iron (Dexion), (12) 1/4” x 2” st st carriage bolts with nuts, (16) 1/4” x 1.5” st st lag screws with st st flat washers, roughly a dozen #14 x 2” st st fully threaded screws, 10oz cartridge of Loctite PL S30 Roof Sealant, paintable latex exterior caulk. Another reviewer suggested caulking the bottom louver so rain can’t flow in, I agree with that and used a paintable exterior caulk. I also stapled four pieces of screening inside the louvers. After masking off the copper roof I sprayed 3 light coats of gloss white latex house paint. My roof is a bit steeper than 10/12 (the pitch is measured as rise/run, meaning 10” of rise every 12” horizontal). A saw protractor and a straight edge captured the roof angles at the peak, easily transcribed to the base. Cut with a skilsaw and finished with an osc multi tool. Don’t forget, you want the cut to die out at the inside of the bottom of the base, unless you want to bevel the bottom apron at the same angle. The instructions suggest using 4 pieces of 2x4 as nailing/screwing blocks to mount to your roof, I substituted 2 pieces of steel angle (Dexion - like you’d build shelf uprights from). I think it was much easier. Cut 2 identical pieces of angle, with prepunched holes symmetrical around the center. Slit one flange at the center so you can bend to match the vee you’ve cut in the base. Set these pieces about 1/4” back from the edge and mount with three 1/4” dia stainless steel carriage bolts on each of the four slopes. Adding two additional angle straps midway, going between the two pieces you just installed, will allow you to fasten directly into the roof joists. Now predrill your clearance and pilot holes for 8 lag screws to hold the louver section to the base, and 8 lag screws to hold the roof to the louver section - you should make an identifying mark on one face of all three sections so you can reassemble in the same orientation. Rooftop installation is now fairly easy, which is good because everything is 10+ times harder when you are on the roof. Set the base in place, confirm it is level, attach with the #14 x 2 screws. Apply a generous bead of the urethane Roof Sealant on the four angled sides, none across the bottoms because any water there you’d want to drain easily. Louver section goes on with (8) 1/4” lag screws with flat washers (you predrilled pilot holes in the base so the plywood won’t split out). Same deal for the top - (8) 1/4” lag screws with flat washers. Conclusion: I give these people an A+ on this cupola. Quality and workmanship are first class. I had some questions for them and their customer service is excellent as well. It feels really good to be buying a domestic product instead of some offshore piece. And lastly, Amazon truck delivery couldn’t be easier.

Scritto da: JRD

No flush mount

Don't expect the sides to be flush with the roof. If you watch their installation videos, they never show how to cut the sides to be flush with the roof slant/pitch. Their hands always cover the corners. Yes you can install it, but get a pro.

Scritto da: Marianne Wagner

Directions for assembly with product challenging

If you go to the Good Directions website there are helpful videos for assembly. Came with two small dents on edges of copper top, but not found until totally unwrapped two weeks after received. Good directions did supply the mounting rod needed for the cupola. We put screen coverings on the inside of the louvres to prevent bee nesting in the cupola.

Scritto da: Tom D.

Very well made

Very well-made and nice looking my only problem is arrived with a big dent in the copper roof

Scritto da: Donald Fowler

Looks great

Purchased to use with a weathervane on the roof of our garden shed. It looks great, and was an easy install. The built in clamp to secure the weathervane is a convenient touch! Very pleased with this purchase.

Scritto da: KTW

cheap cheap and make sure to seal and paint it. INSIDE and out

Cheap staple construction thin wood and needs to be glued primed and painted inside and out. It will rot in no time. BUT looks nice and hope I get a few years out of it.

Scritto da: Dennis J.

Very well built cupola. Heavy duty.

This cupola was a replacement for one that had been on the roof for 35 years. I expect this one will be on the roof for 50 more. Workmanship, materials, instructions all top notch. No complaints. We used 2x2s instead of 2x4s to attach but angled the screws accordingly. Think about what you need to do and adapt. Plenty of caulking.

Scritto da: Joan Jeffery

Gorgeous

Fit my mini barn just perfectly, it is well made and adds a quality feature to make us smile every we see it.

Scritto da: Steve061

The final product looks amazing

It finished off the sunroom extension to my cottage perfectly

Scritto da: Donna Watson

Cupola

I am putting the cupola on my garden shed. It’s just as shown in photo, I painted it to match my shed and it’s the talk of the neighbourhood. Have added a copper duck weather vane to the top. Beautiful!