iDesign plastikinis savaime nutekantis siurbtukas prie sienos montuojamas virtuvės kriauklės muilo laikiklis – 2,5 x 3,5 x 6, skaidrus 1

Name: iDesign plastikinis savaime nutekantis siurbtukas prie sienos montuojamas virtuvės kriauklės muilo laikiklis – 2,5 x 3,5 x 6, skaidrus 1
Brand: iDesign
SKU: 0748377161022
Price: 28.23 EUR
Availability: InStock

Brand:iDesign

3.2/5

€
28.23

Turėkite muilą po ranka su iDesign siurbimo puodelio muilo laikikliu! Dušo muilo laikiklis puikiai tinka naudoti virtuvės kriauklėje, dušo kabinoje ar vonioje. Ši muilo taupyklė pagaminta iš skaidraus, patvaraus plastiko, kad būtų galima kokybiškai naudoti daugelį metų. Muilinė dušui sukurta su unikalia anga, leidžiančia lengvai išleisti vandenį, kad muilas išliktų sausas ir pailgėtų jo tarnavimo laikas. Siurbtukas siurbia lygius neakytas paviršius, tokius kaip plytelės, stiklas, stiklo pluoštas ir kai kurie metalai. Šiame virtuvės kriauklei skirtame muilo padėkle yra muilo gabaliukai, kempinės ir šveitimas virtuvėje, pagrindiniame vonios kambaryje, svečių vonios kambaryje ir vaikų vonios kambaryje. Vonios muilo laikiklio matmenys 2,5 x 3,5 x 6, puikiai tinka jūsų namams. Naudodami „iDesign“ galite tiesiog gyventi kiekvieną dieną.

Nėra vienetų

EAN: 0748377161022

Kategorijos Namai ir virtuvė, Vonia, Vonios reikmenys, Dėklai ir dozatoriai, Milo indeliai,

IDEALUS DYDIS – 2,5 x 3,5 x 6 matmenų muilo padėklas puikiai tinka lengvai prieiti prie muilo virtuvės kriauklėje, dušo kabinoje ar vonioje. ILGUS IR STILINGAS – pagamintas iš patvaraus skaidraus plastiko, dušo muilo laikiklis skirtas kokybiškam naudojimui metų metus; permatomas dizainas leidžia lengvai peržiūrėti turinį iš pirmo žvilgsnio. LENGVAS IŠLEIDIMAS – ši ant sienos tvirtinama pakabinama muilinė yra jūsų sprendimas, kaip išlaikyti muilo juosteles sausas ir pailginti jų tarnavimo laiką; virtuvinio muilo padėklas turi unikalią angą, kuri leidžia lengvai nusausinti. STIPRUS SIURBIMAS – visada turėkite po ranka savo muilą; Šiame virtuvės kriauklės padėkle yra siurbtukas, kuris tvirtinamas prie bet kokio lygaus neakytojo paviršiaus, pavyzdžiui, plytelių, stiklo, stiklo pluošto ir kai kurių metalų. MUILINĖS LAIKIKLIS – Virtuvinės kriauklės muilo padėklas su iDesign siurbimo puodeliu puikiai tinka naudoti virtuvėje, pagrindiniame vonios kambaryje, svečių vonios kambaryje, vaikų vonios kambaryje, dušuose ar voniose; šioje savaime nusausinančioje muilo indelyje telpa muilo gabaliukai, kempinės ir šveitikliai.

Brand	iDesign
Color	Clear
Country of Origin	China
Customer Reviews	4.1 4.1 out of 5 stars 1,440 ratings 4.1 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	No
Item model number	24400
Item Weight	0.1 Pounds
Item Weight	1.6 ounces
Manufacturer	iDesign
Material	Plastic
Mounting Type	Wall Mount
Number of Pieces	1
Product Dimensions	2.5 x 6 x 3.56 inches
Product Dimensions	6"L x 3.5"W
Shape	Cup
Special Feature	Durable

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: Brian D

Great Long-lasting Soap Holder

This soap holder lasted 10 years of daily use! Never had an issue with suction and it holds the soap well.

Scritto da: Steve

Get what you pay for.

Suction cup does not hold up very long.

Scritto da: B. Thompson

Streamlined soap dish

Like the design, bought three for all the sinks in my house, two of the suction cups aren’t doing a great job.

Scritto da: Mad Master

This simple holder can save a lot of money for users of expensive bar soaps

I got this soap holder to protect my expensive soap from unnecessary moisture from the shower head. I use Grandpa's Pine Tar Soap, and at 4 dollars a bar, I knew I need protection for it. In the past I left bar soap in the built in tub caddy, this resulted in the bar of soap getting blasted with water spray and becoming soft and dissolving away after only a few uses, leaving a mess of soap scum and residue. After that I tried storing it inside a plastic box, however the cracks between the lid and the bottom allowed water to leak in. This form a pool of soap destroying water inside the box. These issues caused me to stop using bar soap for years. After learning about the harsh chemicals and xenoestrogens in the shower gel I was using, I switched to back to bar soap. I was still left with the problem of protecting my soap from unwanted water. After thinking about it for a minute, I knew I needed a holder that kept the soap as far away from the water as possible. This was perfect. The holster has strong suction cup that you can slap onto any wall. When you are done lathering, you can put the soap safely out the way while you rinse. You can easily hang multiples of these so that everyone can have separate bars of soap. You'll want to mark these if everyone is using the same kind of soap. As the soap gets smaller, there is a small chance it might slip out through the gap in the middle, which is there to drain any water that gets inside. There is a small nub of rubber sticking out from the suction cup for easy removal. The holder itself is wide and deep, easily capable of holding a very large bar. All of the soap residue is contain within the holder for easy cleanup. This holster has extended the life span of my soap considerably, and I couldn't be more pleased. For the price of one bar of soap, you can save yourself from wasting dozens.

Scritto da: Amazon Customer

decent

suction is okay, fell down a couple times.

Scritto da: AC

Best soap holder ever

If you still use bar soap and don’t like for it to sit in a puddle of water this IS THE ANSWER!! I found this type of product about a decade ago and I’ve searched for years to find more. Once I found this one I ordered several more. I’m certain the few extras I bought will last me the rest of my life unless I give them away LOL!!! It easy to keep clean and keeps the soap clean and dry.

Scritto da: Paul

Warped suction cup----does NOT stay On

the plastic is nice and clear----but the Suction cup is FLAT.....NO dome shape... it does not stay on for more than 2 minutes...useless...

Scritto da: THM

It Does the Job

The surface you're attaching these to needs to be completely flat, and very clean. Make sure to clean the surface, and the suction cup with rubbing alcohol and allow to dry. Use distilled, or reverse osmosis treated water to wet the surface prior to attaching. I have 5 of these and they will rarely fall off the surface they're attached to. Keeps soap dry between uses and extends the life of the bar.