Komercinis virėjo maisto dehidratatorius, maisto ir trūkčiojimo dehidratatorius, CCD100W6, 280 vatų, baltas

Brand:Commercial Chef

3.5/5

127.65

Paverskite savo mėgstamus vaisius, daržoves ir mėsą skaniai sveikais užkandžiais su šiuo išskirtiniu COMMERCIAL CEF maisto džiovinimo aparatu namams. Esant 104–158 °F temperatūros diapazonui, galite lengvai nustatyti geriausią šio maisto dehidratatoriaus nustatymą jautienos mėsai, džiovintiems grybams ir net žolelėms. Su 5 sluoksniais padėklų galite užtikrinti vienodą džiovinimą ir optimalų produktyvumą naudodami mūsų puikų mėsos dehidratatorių. Kiekvienas padėklas yra nuimamas ir plaunamas tik rankomis. Dėl kompaktiškų mūsų 280 W trūkčiojančio dehidratatoriaus matmenų (9,92 x 9,43 x 7,01 colio) galite lengvai laikyti jį virtuvėje. Taip pat pridedamas džiovinimo vadovas, skirtas tiems, kurie naujokams įdomų dehidratatorių pasaulį.

SVEIKI UŽKANDŽIAI – mūsų neįtikėtinas maisto džioviklis padeda jums laikytis Naujųjų metų pažadų, nes gaminate greitus, lengvus ir sveikus užkandžius. Ši maisto džiovyklė tinka įvairiems naminiams maisto produktams, pavyzdžiui, grybams ir kalakutienai, taip pat užkandžiams, pvz., bananų traškučiams, vaisių vyniotiniams ir jautienos džiūvėsėliams. LENGVAI LAIKYTI IR VALYTI – mūsų fantastiško mėsos dehidratoriaus padėklai plaunami tik rankomis, kad būtų galima lengvai išvalyti ir supaprastinti laikymą. Pastatykite šį maisto džiovintuvą namuose savo virtuvės sandėliuke arba spintelėje, kai nenaudojate. REGULIUOJAMŲJŲ TERMOSTATŲ DIAPAZONAS – šios džiovyklos (3,3 svaro) temperatūra reguliuojama nuo 104° iki 158°F. Nustatykite optimalų nustatymą ir leiskite šiam trūkčiojančiam aparatui atlikti visą darbą už jus!. 5 sluoksniai padėklų – laikomas vienu geriausių maisto ir trūkčiojimų sausintuvų, šis fenomenalus virtuvės prietaisas susideda iš 5 apvalių padėklų, kurių pakanka daugumai maisto produktų laikyti ir vienodai išdžiovinti. NAUDOKITE SU MĖGSTAMIAUS MAISTAIS – šis COMMERCIAL CHEF maisto dehidratatorius pašalina drėgmę ir užfiksuoja originalius, niuansuotus jūsų mėgstamų užkandžių skonius. Mūsų išskirtinis dehidratorius maistui (9,92" x 9,43" x 7,01") turi 280 W galią, kad išsaugotumėte mėgstamą mėsą, vaisius, daržoves, vaisius ir net žoleles.
Brand Commercial Chef
Color White
Country of Origin China
Customer Reviews 4.4 4.4 out of 5 stars 1,968 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Is Dishwasher Safe No
Item Dimensions LxWxH 9.92 x 9.43 x 7.01 inches
Item model number CCD100W6
Item Weight 3.3 Pounds
Manufacturer W Appliance Company
Material Plastic
Material Feature Food Safe
Number of Trays 5
Product Dimensions 9.9"D x 9.4"W x 7"H
Product Dimensions 9.92 x 9.43 x 7.01 inches
Shape Round
Temperature Range 158 Degrees Fahrenheit
Wattage 280 watts

3.5

9 Review
5 Star
70
4 Star
15
3 Star
7
2 Star
3
1 Star
6

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti*

Scritto da: remy
Works great to dry filiment
Just cut the supports out of the rings and it makes a great filament dryer. Set to 140 and in a few hrs your sloppy tpu is ready to use. You could probably make a ring to place the lid on pretty easy instead of cutting up the original pieces.
Scritto da: J.R.
It works
I was a little worried about the quality, but I’ve had it a few weeks, used it three times and it has been working great.
Scritto da: CJ McFalls
DIY 3D filament dryer!
I bought this to modify into a DIY 3D printer filament dryer. I had to cut all of the supports out of the shelves in order to fit a roll of filament, but this is a great, cheap, DIY alternative to the much more expensive dedicated filament driers. I can't speak to the function of this as a food dehydrator, but it's a great filament dryer!
Scritto da: Eric Witt
Size matters
Product worked well but when you have a stalk of bananas to dry it takes a few go-arounds
Scritto da: Elizabeth Brown
So far so good
Didn't expect it to be a small as it is but it works. So far so good
Scritto da: Peter Kwangjun Suk
So far, checks out as a 3D printer filament dryer
I've been running this for over two hours, with an oven thermometer in the modded chamber. Basically, I just put some corrugated cardboard and two layers of mylar bubble wrap insulation between one tray and the lid. (5" width. Takes about 31" length to make the cylinder.) I also ended up taping 4 of the 6 vent holes in the lid. The oven thermometer reads right at 50 Celsius, or 122 F, which is my target temperature. To get that, I ended up turning the knob just below the 140 degree mark. So temperature control isn't 100% accurate, but the temp seems to be stable. Adding the bubble wrap insulation seems to be a must. Before I added it, the chamber wall felt very warm, but with the bubble wrap, the outer temp feels not much more than room temp. Another 3D printer reviewer also used a cardboard chamber, but couldn't achieve his desired temperature. The increased surface area probably radiates heat away too fast for the heater to keep up. This makes me seriously question the value of this device as a food dryer, unless one makes a bubble wrap insulation couzy for the trays. Also, another reviewer talked about taping the vent holes up on the lid, after which some component melted. I think the blower/heater depends on airflow for cooling, so I wouldn't tape all of the holes up. In any case, I'm about to get my first filament spool to try drying it overnight.
Scritto da: Amazonuser5
Perfect for my use
I ordered this to dehydrate the lemons from my tree. So far I have found that using the temperature at 140 works well, but it takes two full days to get them completely dry. I don't mind the extra time as this helped them from turning brown. I have not tried on anything else... yet!
Scritto da: Morgan
Functional and good pricing.
Used this product for a few months now and it has been great! Does what it is supposed to do. Not the fanciest dehydrator but perfect for making a snack here and there.
Scritto da: K.
Wow, so happy with this dehydrator
This is the first dehydrator that I purchased mainly to make jerky since I am a big meat eater. The first day I made beef jerky, highest temp setting and in 3 hours it was ready to eat..so delicious. The next day I made porc jerky..just delicious!!! Rotate the trays every half hour or so so that everything dries evenly. I have been using it every day because I can't even keep the jerky around it gets eaten up too quickly no matter how much I make.

Susiję produktai

hot
Vaisių ritininiai lakštai
3.5/5

€ 41.48

Vaisių ritininiai lakštai
3.5/5

€ 41.48

Atraskite mūsų tarptautinį tinklą

Siunčiame į 28 šalis, daugiau nei 200 000 produktų. Sekite naujienas, užsiprenumeruokite naujienlaiškį.

Array