Lotos PCS22 plazminių pjaustytuvų eksploatacinių medžiagų rinkiniai, skirti rudos spalvos LTP5000D ir rudos spalvos LTPDC2000D (22 vnt.)

Name: Lotos PCS22 plazminių pjaustytuvų eksploatacinių medžiagų rinkiniai, skirti rudos spalvos LTP5000D ir rudos spalvos LTPDC2000D (22 vnt.)
Brand: LOTOS
SKU: 0856117006264
Price: 86.58 EUR
Availability: InStock

Brand:LOTOS

3.7/5

€
86.58

Loots Technology PCS22 yra eksploatacinių medžiagų rinkinys, sukurtas specialiai Brown Color Loots Plasma Cutter modeliams: Suderinamas tik su BROWN Color Loots LTP5000D, LTPDC2000D. NESUDERINAMAS su Red Color Loots LTP5000D, LTPDC2000D. Jame yra 10 purkštukų, 10 elektrodų, 1 puodelis ir 1 stovo kreiptuvas. Šis eksploatacinių medžiagų rinkinys gali būti nesuderinamas su kitais plazminių pjaustytuvų modeliais ir (arba) plazminiams pjaustytuvams turėtų būti naudojamos tik „Loots Technology“ gamykloje pagamintos originalios eksploatacinės medžiagos. Norėdami įsigyti plazminio pjaustytuvo eksploatacines medžiagas, skirtas Red Color Loots LTP5000D, LTPDC2000D, Blue Color LTP6000, ieškokite Loots PCON40 arba Loots PCON90

Suma

Į krepšelį Pirkti dabar

EAN: 0856117006264

Kategorijos Pramoniniai ir moksliniai prietaisai, Įrankiai ir namų apyvokos reikmenys, Suvirinimo ir Litavimas, Suvirinimo įranga, Suvirinimo įranga ir priedai, Plazminio pjovimo įranga,

Purkštukai ir elektrodai pagaminti iš tikro 100% vario, o ne pigaus padengto vario lydinio. Jis netinka jokio kito prekės ženklo ir jokio kito modelio plazminiams pjaustytuvams. Apima: 10 purkštukų 10 elektrodų 1 puodelį 1 stovo kreiptuvą. NEGALIMA naudoti RED Color Lotos LTP5000D ir RED Color Lotos LTPDC2000D. Galima naudoti tik su BROWN Color Lotos LTP5000D ir BROWN Color Lotos LTPDC2000D.

Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	PCS22
Manufacturer	Lotos Technology
Package Dimensions	8.31 x 4.84 x 1.46 inches; 10.55 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Parašykite savo atsiliepimą

Jūsų el. paštas nebus paskelbtas. Visi privalomi laukai pažymėti^*

Jūsų įvertinimas

Scritto da: br549

Well made

The set was a little pricey, so I gave it 4 stars, but the cutter is great and was a good deal. Balances out. Cheaper to buy the 77 piece set.

Scritto da: Amber Mace

Very impressed!

Highly recommend this product my husband loves it

Scritto da: Yoter

If you intend on using the plasma, just get the big pack of consumables. I go through them often

Cheap, easy to change. Don’t last very long

Scritto da: PWG

*****

Perfect replacement parts. Don't hesitate to purchase them.

Scritto da: Smith Farms

Exact components as the ones that came with it.

I purchased the 77 piece set because the smaller sets are just too expensive. I have always cut with acetylene/oxygen torch so this is my first time with a plasma torch. Consumables last longer as I learn to master the this process. Regarding the review with the cone that caught on fire, I don't know what that material is, mine are ceramic with pressed in brass threads. The brass threads are the only difference than the set that came on the machine. Have already made several cuts with new consumables and it cuts exactly the same as OEM. Ground is critical to the process. No plasma cutter will perform well with poor ground. I removed the cover on mine and removed the ground screw (which was not super tight), filed off the powder coat under it and reinstalled the ground screw very tight. I had about 30 feet of #2 ground cable lying around so I made a new ground cable the same length as the torch. I replaced the ground clamp with the HF 2nd tier ground clamp (actually a decent clamp). You must always check the connections throughout the ground before cutting and then once a year or so depending on how much you use it. The hardware on the HF clamp was loose on both sides. Basically, make a couple of small cuts, shut the machine off and feel all your ground connections for heat. If any of them are warm-hot, that is a poor connection and must be resolved.

Scritto da: Fourvalv

Buy a set when you buy the plasma cutter

My plasma cutter had already quit working (after not a ton of usage). After some searching for repair instructions, I thought I'd try changing out the consumables on the torch. Indeed, I found the tip was in bad shape. Ordered the kit shown here and the cutting function returned. Just buy a set (or two?) and put on the shelf. You'll probably need them.

Scritto da: UpState NYer

Pricey but it's the only game in town.

Only Lotus consumables fit Lotus machines. While the consumables themselves are fine, having Amazon deliver them to your mail box is another matter. For some reason they get lost in the mail. The ceramic cups arrived broken due to extremely poor packaging.

Scritto da: David Phillips

Great consumables

They are the right ones for the LTP5000D